PartsTable
Technical Data Sheet
Download PDF

04-0060 — PLUG,PIPE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

04-0060: PLUG,PIPE.

The PLUG,PIPE is a the manufacturer industrial component. Key specifications include part_name_assigned_by_controlling_agency: AC MOTOR, FRAME TYPE 405Z, SADDLE WINCH MOTOR. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-483-5002, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
04-0060
NSN: 5310-01-483-5002
NIINs: 014835002, 014840726, 015640573
FSC: 5310 — Nuts and Washers
CAGE: 20019 — WARD LEONARD CT LLC (USA)
SPECIFICATIONS
part_name_assigned_by_controlling_agencyAC MOTOR, FRAME TYPE 405Z, SADDLE WINCH MOTOR
NSN5310-01-483-5002
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 04-0060 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNS
•
THREAD PITCH DIAMETERS: +3.0770 TO 3.0829 INCHES IN
•
DRIVE POINT WIDTH: 0.355 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 3.137 INCHES IN
•
NUT DIAMETER: 4.141 INCHES MINIMUM AND 4.156 INCHES MAXIMUM IN
•
DRIVE POINT DEPTH: 0.250 INCHES NOMINAL IN
•
UNDERCUT THICKNESS: 0.203 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUNS
THREAD PITCH DIAMETERS+3.0770 TO 3.0829 INCHES IN
DRIVE POINT WIDTH0.355 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE3.137 INCHES IN
NUT DIAMETER4.141 INCHES MINIMUM AND 4.156 INCHES MAXIMUM IN
DRIVE POINT DEPTH0.250 INCHES NOMINAL IN
UNDERCUT THICKNESS0.203 INCHES NOMINAL IN
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
NUT THICKNESS0.656 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
04-0060 ITEM NO 83Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
K59-0048Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
BH16Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 04-0060?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 04-0060?
04-0060 is a PLUG,PIPE.
What parts can replace 04-0060?
There are 3 known substitutes for 04-0060: 04-0060 ITEM NO 83, K59-0048, BH16. Substitute compatibility should be verified for your specific system.
What is the NSN for 04-0060?
04-0060 is cataloged in the U.S. Government catalog under NSN 5310-01-483-5002. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 04-0060

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.