The LOCK,VALVE SPRING RETAINER is a the manufacturer industrial component. Key specifications include material: STEEL, overall_height: 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN, style_designator: STRAIGHT BORE W/TWO GROOVES-LOWER OUTSIDE RADIUS, thread_provision: UNTHREADED, first_groove_width: 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN, second_groove_width: 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 2805-00-741-5300, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| material | STEEL |
| overall_height | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN |
| special_features | 63 MIROINCH RMS FINISH SURFACES OF TOP,BOTTOM,AND GROOVES;32 MICROINCH RMS FINISH SURFACES OF OD AND BOTH ID;0.025 IN.MIN TO 0.031 IN.MAX RADIUS BETWEEN SMALLEST ID AND GROOVES IN |
| style_designator | STRAIGHT BORE W/TWO GROOVES-LOWER OUTSIDE RADIUS |
| thread_provision | UNTHREADED |
| first_groove_width | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN |
| second_groove_width | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN |
| fsc_application_data | MAIN ENGINE,CARRIER CARGO,AMPHIBIOUS |
| casehardening_indicator | NOT CASEHARDENED |
| largest_inside_diameter | 0.430 INCHES MINIMUM AND 0.434 INCHES MAXIMUM IN |
| minimum_inside_diameter | 0.376 INCHES IN |
| largest_outside_diameter | 0.652 INCHES NOMINAL IN |
| NSN | 2805-00-741-5300 |
| FSC APPLICATION DATA | MAIN ENGINE,CARRIER CARGO,AMPHIBIOUS |
| DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 0.143 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN |
| SPECIAL FEATURES | 63 MIROINCH RMS FINISH SURFACES OF TOP,BOTTOM,AND GROOVES;32 MICROINCH RMS FINISH SURFACES OF OD AND BOTH ID;0.025 IN.MIN TO 0.031 IN.MAX RADIUS BETWEEN SMALLEST ID AND GROOVES IN |
| THREAD PROVISION | UNTHREADED |
| MATERIAL | STEEL |
| OVERALL HEIGHT | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN |
| DISTANCE FROM BOTTOM TO FIRST GROOVE CENTER | 0.171 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN |
| LARGEST INSIDE DIAMETER | 0.430 INCHES MINIMUM AND 0.434 INCHES MAXIMUM IN |
| LARGEST OUTSIDE DIAMETER | 0.652 INCHES NOMINAL IN |
| STYLE DESIGNATOR | STRAIGHT BORE W/TWO GROOVES-LOWER OUTSIDE RADIUS |