PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 036878-7
036878-7 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PAD EYE is a the manufacturer industrial component. Key specifications include diameter: 1.500 INCHES NOMINAL IN, material: COPPER ALLOY OVERALL, construction: FORGED, style_designator: ROUND, features_provided: POLISHED, surface_treatment: CHROMIUM OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-125-1140, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
036878-7
NSN: 5340-01-125-1140
FSC: 5340
CAGE: 67060 — SEA CURE TECHNOLOGY, INC (USA)
SPECIFICATIONS
diameter1.500 INCHES NOMINAL IN
materialCOPPER ALLOY OVERALL
constructionFORGED
style_designatorROUND
features_providedPOLISHED
surface_treatmentCHROMIUM OVERALL
eye_inside_diameter1.250 INCHES NOMINAL IN
NSN5340-01-125-1140
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 036878-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: ROUND
•
MATERIAL: COPPER ALLOY OVERALL
•
EYE INSIDE DIAMETER: 1.250 INCHES NOMINAL IN
•
FEATURES PROVIDED: POLISHED
•
SURFACE TREATMENT: CHROMIUM OVERALL
•
DIAMETER: 1.500 INCHES NOMINAL IN
•
CONSTRUCTION: FORGED
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORROUND
MATERIALCOPPER ALLOY OVERALL
EYE INSIDE DIAMETER1.250 INCHES NOMINAL IN
FEATURES PROVIDEDPOLISHED
SURFACE TREATMENTCHROMIUM OVERALL
DIAMETER1.500 INCHES NOMINAL IN
CONSTRUCTIONFORGED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
4027Upgraded Successor
successor cross-reference
successor
SC060-1Interchangeable
interchangeable cross-reference
interchangeable
78101Interchangeable
interchangeable cross-reference
interchangeable
ES455-2Interchangeable
interchangeable cross-reference
interchangeable
7601509-4Interchangeable
interchangeable cross-reference
interchangeable
9-6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 036878-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 036878-7?
036878-7 is a PAD EYE.
What parts can replace 036878-7?
There are 12 known substitutes for 036878-7: 4027, SC060-1, 78101 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 036878-7?
036878-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-125-1140. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 036878-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026