PartsTable
Technical Data Sheet
Download PDF

0362039-1 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

0362039-1: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.145 INCHES MINIMUM AND 0.155 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.000 INCHES NOMINAL IN, aperture_width: 1.250 INCHES NOMINAL IN, overall_length: 7.260 INCHES MINIMUM AND 7.380 INCHES MAXIMUM IN, aperture_length: 6.940 INCHES NOMINAL IN, style_designator: NON-CIRCULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-194-4712, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0362039-1
NSN: 5330-01-194-4712
FSC: 5330 — Packing and Gasket Materials
CAGE: 24587 — RAYTHEON CO ESD LONG ISLAND DIV (USA)
SPECIFICATIONS
hole_diameter0.145 INCHES MINIMUM AND 0.155 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.000 INCHES NOMINAL IN
aperture_width1.250 INCHES NOMINAL IN
overall_length7.260 INCHES MINIMUM AND 7.380 INCHES MAXIMUM IN
aperture_length6.940 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
bolt_hole_quantity10
outside_corner_bevel_length_along_width0.220 INCHES NOMINAL IN
outside_corner_bevel_length_along_length0.220 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.220 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_length1.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-01-194-4712
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0362039-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-CIRCULAR
•
APERTURE WIDTH: 1.250 INCHES NOMINAL IN
•
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH: 0.220 INCHES NOMINAL IN
•
APERTURE LENGTH: 6.940 INCHES NOMINAL IN
•
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH: 0.220 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 10
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH7.260 INCHES MINIMUM AND 7.380 INCHES MAXIMUM IN
OVERALL WIDTH2.000 INCHES NOMINAL IN
APERTURE WIDTH1.250 INCHES NOMINAL IN
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH0.220 INCHES NOMINAL IN
APERTURE LENGTH6.940 INCHES NOMINAL IN
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH0.220 INCHES NOMINAL IN
BOLT HOLE QUANTITY10
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.220 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 0362039-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0362039-1?
0362039-1 is a GASKET.
What is the NSN for 0362039-1?
0362039-1 is cataloged in the U.S. Government catalog under NSN 5330-01-194-4712. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0362039-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.