PartsTable
Technical Data Sheet
Download PDF

0362033-1 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

0362033-1: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.312 INCHES MINIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 6.820 INCHES MINIMUM AND 6.880 INCHES MAXIMUM IN, aperture_width: 5.460 INCHES MINIMUM AND 5.520 INCHES MAXIMUM IN, overall_length: 10.880 INCHES MINIMUM AND 11.000 INCHES MAXIMUM IN, aperture_length: 9.380 INCHES MINIMUM AND 9.500 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-194-4713, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0362033-1
NSN: 5330-01-194-4713
FSC: 5330 — Packing and Gasket Materials
CAGE: 24587 — RAYTHEON CO ESD LONG ISLAND DIV (USA)
SPECIFICATIONS
hole_diameter0.312 INCHES MINIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width6.820 INCHES MINIMUM AND 6.880 INCHES MAXIMUM IN
aperture_width5.460 INCHES MINIMUM AND 5.520 INCHES MAXIMUM IN
overall_length10.880 INCHES MINIMUM AND 11.000 INCHES MAXIMUM IN
aperture_length9.380 INCHES MINIMUM AND 9.500 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR
bolt_hole_quantity16
outside_corner_bevel_length_along_width0.130 INCHES NOMINAL IN
outside_corner_bevel_length_along_length0.130 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_width0.410 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.380 INCHES NOMINAL IN
NSN5330-01-194-4713
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0362033-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-CIRCULAR
•
APERTURE WIDTH: 5.460 INCHES MINIMUM AND 5.520 INCHES MAXIMUM IN
•
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH: 0.130 INCHES NOMINAL IN
•
APERTURE LENGTH: 9.380 INCHES MINIMUM AND 9.500 INCHES MAXIMUM IN
•
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH: 0.130 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 16
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH10.880 INCHES MINIMUM AND 11.000 INCHES MAXIMUM IN
OVERALL WIDTH6.820 INCHES MINIMUM AND 6.880 INCHES MAXIMUM IN
APERTURE WIDTH5.460 INCHES MINIMUM AND 5.520 INCHES MAXIMUM IN
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH0.130 INCHES NOMINAL IN
APERTURE LENGTH9.380 INCHES MINIMUM AND 9.500 INCHES MAXIMUM IN
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH0.130 INCHES NOMINAL IN
BOLT HOLE QUANTITY16
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.380 INCHES NOMINAL IN
HOLE DIAMETER0.312 INCHES MINIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 0362033-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0362033-1?
0362033-1 is a GASKET.
What is the NSN for 0362033-1?
0362033-1 is cataloged in the U.S. Government catalog under NSN 5330-01-194-4713. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0362033-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.