PartsTable
Technical Data Sheet
Download PDF

036051-2.50IN-PIECE 15 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

036051-2.50IN-PIECE 15: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: IRON OVERALL, overall_width: 4.438 INCHES NOMINAL IN, aperture_width: 3.688 INCHES NOMINAL IN, gage_thickness: 0.019 INCHES NOMINAL IN, overall_length: 5.812 INCHES NOMINAL IN, aperture_length: 5.062 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-932-4755, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
036051-2.50IN-PIECE 15
NSN: 5330-00-932-4755
FSC: 5330 — Packing and Gasket Materials
CAGE: 48422 — WILLIAM POWELL COMPANY, THE DBA POWELL VALVE DIV THE STARFLO CORPORATION (USA)
SPECIFICATIONS
materialIRON OVERALL
overall_width4.438 INCHES NOMINAL IN
aperture_width3.688 INCHES NOMINAL IN
gage_thickness0.019 INCHES NOMINAL IN
overall_length5.812 INCHES NOMINAL IN
aperture_length5.062 INCHES NOMINAL IN
inside_corner_radius0.688 INCHES NOMINAL IN
outside_corner_radius1.062 INCHES NOMINAL IN
center_to_center_distance0.125 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL
NSN5330-00-932-4755
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 036051-2.50IN-PIECE 15 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.688 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: METAL
•
APERTURE WIDTH: 3.688 INCHES NOMINAL IN
•
APERTURE LENGTH: 5.062 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 1.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.688 INCHES NOMINAL IN
OVERALL LENGTH5.812 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEMETAL
OVERALL WIDTH4.438 INCHES NOMINAL IN
APERTURE WIDTH3.688 INCHES NOMINAL IN
APERTURE LENGTH5.062 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS1.062 INCHES NOMINAL IN
MATERIALIRON OVERALL
CENTER TO CENTER DISTANCE0.125 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
036051-2.50IN-PReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 036051-2.50IN-PIECE 15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 036051-2.50IN-PIECE 15?
036051-2.50IN-PIECE 15 is a GASKET.
What parts can replace 036051-2.50IN-PIECE 15?
There is 1 known substitute for 036051-2.50IN-PIECE 15: 036051-2.50IN-P. Substitute compatibility should be verified for your specific system.
What is the NSN for 036051-2.50IN-PIECE 15?
036051-2.50IN-PIECE 15 is cataloged in the U.S. Government catalog under NSN 5330-00-932-4755. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 036051-2.50IN-PIECE 15