PartsTable
Technical Data Sheet
Download PDF

036-27549VM — RETAINER,HELICAL COMPRESSION SPR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

036-27549VM: RETAINER,HELICAL COMPRESSION SPR.

RETAINER,HELICAL COMPRESSION SPR. Key specifications include special_features: MAGNETIC PERMABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION, fsc_application_data: VALVE RELIEF HYD .75IPS, criticality_code_justification: ZZZY. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-383-8512, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
036-27549VM
NSN: 5340-01-383-8512
FSC: 5340 — Hardware, Commercial
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
special_featuresMAGNETIC PERMABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION
fsc_application_dataVALVE RELIEF HYD .75IPS
criticality_code_justificationZZZY
reference_number_differentiating_characteristicsEQUIPMENT AND/OR PARTS REQUIRING SPECIAL MATERIAL CONTROL AND QUALITY ASSURANCE WHICH SUPPORT THE NON-MAGNETIC SIGNATURE OF MINESWEEPERS
NSN5340-01-383-8512
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 036-27549VM MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: VALVE RELIEF HYD .75IPS
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: EQUIPMENT AND/OR PARTS REQUIRING SPECIAL MATERIAL CONTROL AND QUALITY ASSURANCE WHICH SUPPORT THE NON-MAGNETIC SIGNATURE OF MINESWEEPERS
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATAVALVE RELIEF HYD .75IPS
CRITICALITY CODE JUSTIFICATIONZZZY
SPECIAL FEATURESMAGNETIC PERMABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSEQUIPMENT AND/OR PARTS REQUIRING SPECIAL MATERIAL CONTROL AND QUALITY ASSURANCE WHICH SUPPORT THE NON-MAGNETIC SIGNATURE OF MINESWEEPERS
SUBSTITUTES & CROSS-REFERENCES 3
036-27549-0Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
036-27549-0VMSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
036-27549Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 036-27549VM?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 036-27549VM?
036-27549VM is a RETAINER,HELICAL COMPRESSION SPR.
What parts can replace 036-27549VM?
There are 3 known substitutes for 036-27549VM: 036-27549-0, 036-27549-0VM, 036-27549. Substitute compatibility should be verified for your specific system.
What is the NSN for 036-27549VM?
036-27549VM is cataloged in the U.S. Government catalog under NSN 5340-01-383-8512. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 036-27549VM