PartsTable / MRO / 035598
035598
✓ Verified by PartsTable
Legrand · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
CAPACITOR,FIXED,PLASTIC DIELECTR. Key specifications include phase: SINGLE, length: 1.670 INCHES MINIMUM AND 1.790 INCHES MAXIMUM IN, material: ALUMINUM ALLOY OVERALL, case_style: RECESSED, drive_type: DIRECT, seal_width: 0.500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-055-3870, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MRO →
MRO_GENERAL →
035598
NSN: 5330-01-055-3870 FSC: 5330 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
phase SINGLE length 1.670 INCHES MINIMUM AND 1.790 INCHES MAXIMUM IN material ALUMINUM ALLOY OVERALL case_style RECESSED drive_type DIRECT seal_width 0.500 INCHES NOMINAL IN temp_rating -50.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF air_flow_rate 100.0 CUBIC FEET PER MINUTE NOMINAL flow_direction INWARD inclosure_type FULLY INCLOSED prime_mover_type ELECTRIC MOTOR style_designator FIXED NSN 5330-01-055-3870
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 035598
MFR: Legrand
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
• SEALING ELEMENT STYLE: ANGULAR
• TEMP RATING: -50.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
• HOUSING BORE DIAMETER: 2.561 INCHES NOMINAL IN
• MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
• ACCOMMODATED SHAFT DIAMETER: 1.718 INCHES NOMINAL IN
TYPICAL APPLICATIONS
RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLE RECESSED ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT SEALING ELEMENT STYLE ANGULAR TEMP RATING -50.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF HOUSING BORE DIAMETER 2.561 INCHES NOMINAL IN MATERIAL RUBBER SYNTHETIC SEALING ELEMENT MATERIAL STEEL CASE ACCOMMODATED SHAFT DIAMETER 1.718 INCHES NOMINAL IN SEAL WIDTH 0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
91002 Interchangeable interchangeable cross-reference
interchangeable
A662-1-R172 Interchangeable interchangeable cross-reference
interchangeable
E45F Interchangeable interchangeable cross-reference
interchangeable
A-A-2930 TY2 Interchangeable interchangeable cross-reference
interchangeable
155-2-9 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 035598?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 035598?
035598 is a CAPACITOR,FIXED,PLASTIC DIELECTR manufactured by Legrand. It is classified as a MRO (MRO_GENERAL).
What parts can replace 035598?
There are 25 known substitutes for 035598: 91002, A662-1-R172, E45F and 22 more. Substitute compatibility should be verified for your specific system.
Is 035598 still available?
035598 is currently cancelled.