PartsTable
Technical Data Sheet
PartsTable / MRO / 035-598
035-598 ✓ Verified by PartsTable
Legrand · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,FIXED,PLASTIC DIELECTR. Key specifications include phase: SINGLE, length: 1.670 INCHES MINIMUM AND 1.790 INCHES MAXIMUM IN, material: ALUMINUM ALLOY OVERALL, case_style: RECESSED, drive_type: DIRECT, seal_width: 0.500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-055-3870, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 035-598
NSN: 5330-01-055-3870
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
phaseSINGLE
length1.670 INCHES MINIMUM AND 1.790 INCHES MAXIMUM IN
materialALUMINUM ALLOY OVERALL
case_styleRECESSED
drive_typeDIRECT
seal_width0.500 INCHES NOMINAL IN
temp_rating-50.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
air_flow_rate100.0 CUBIC FEET PER MINUTE NOMINAL
flow_directionINWARD
inclosure_typeFULLY INCLOSED
prime_mover_typeELECTRIC MOTOR
style_designatorFIXED
NSN5330-01-055-3870
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 035-598 MFR: Legrand ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: RECESSED
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SEALING ELEMENT STYLE: ANGULAR
•
TEMP RATING: -50.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
•
HOUSING BORE DIAMETER: 2.561 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
ACCOMMODATED SHAFT DIAMETER: 1.718 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLERECESSED
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEALING ELEMENT STYLEANGULAR
TEMP RATING-50.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
HOUSING BORE DIAMETER2.561 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
ACCOMMODATED SHAFT DIAMETER1.718 INCHES NOMINAL IN
SEAL WIDTH0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
91002Interchangeable
interchangeable cross-reference
interchangeable
A662-1-R172Interchangeable
interchangeable cross-reference
interchangeable
E45FInterchangeable
interchangeable cross-reference
interchangeable
A-A-2930 TY2Interchangeable
interchangeable cross-reference
interchangeable
GGG-R-180 TY8CL2GRASZ9Interchangeable
interchangeable cross-reference
interchangeable
155-2-9Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 035-598?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 035-598?
035-598 is a CAPACITOR,FIXED,PLASTIC DIELECTR manufactured by Legrand. It is classified as a MRO (MRO_GENERAL).
What parts can replace 035-598?
There are 25 known substitutes for 035-598: 91002, A662-1-R172, E45F and 22 more. Substitute compatibility should be verified for your specific system.
Is 035-598 still available?
035-598 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 035-598

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026