PartsTable
Technical Data Sheet
Download PDF

035-45476 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

035-45476: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 20.750 INCHES NOMINAL IN, first_leg_length: 1.160 INCHES NOMINAL IN, second_leg_style: SQUARE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-333-5486, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
035-45476
NSN: 5340-00-333-5486
FSC: 5340 — Hardware, Commercial
CAGE: 9F512 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV HYDRAULIC PUMP DIVISION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width20.750 INCHES NOMINAL IN
first_leg_length1.160 INCHES NOMINAL IN
second_leg_styleSQUARE
second_leg_width21.938 INCHES NOMINAL IN
special_featuresLH,W/6 HOLES IN EACH LEG AND 6 NUTS WELDED TO 2ND LEG
style_designatorANGLE
second_leg_length2.180 INCHES NOMINAL IN
surface_treatmentPAINT
first_leg_thickness0.148 INCHES NOMINAL IN
NSN5340-00-333-5486
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 035-45476 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.520 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.390 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.560 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG HOLE DIAMETER: 0.410 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 21.938 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 2.180 INCHES NOMINAL IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 2.130 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.520 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.390 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.560 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG HOLE DIAMETER0.410 INCHES NOMINAL IN
SECOND LEG WIDTH21.938 INCHES NOMINAL IN
SECOND LEG LENGTH2.180 INCHES NOMINAL IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH2.130 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
FIRST LEG STYLESQUARE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 035-45476?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 035-45476?
035-45476 is a BRACKET,ANGLE.
What is the NSN for 035-45476?
035-45476 is cataloged in the U.S. Government catalog under NSN 5340-00-333-5486. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 035-45476

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.