034-20062-001 — SWITCH,ROTARY

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

034-20062-001: SWITCH,ROTARY.

The SWITCH,ROTARY is a the manufacturer industrial component. Key specifications include shaft_type: ROUND SINGLE ACTUATOR, shaft_length: 2.250 INCHES NOMINAL SINGLE ACTUATOR IN, thread_class: 2A SINGLE MOUNTING FACILITY A, overall_width: 1.312 INCHES NOMINAL IN, pole_quantity: 1 SINGLE SECTION REAR, terminal_type: TAB, SOLDER LUG. This part is cataloged in the U.S.

Government catalog under NSN 5930-00-752-2630, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 034-20062-001

NSN: 5930-00-752-2630
FSC: 5930 — Switches
CAGE: 12131 — LH ENTERPRISE (USA)

SPECIFICATIONS

shaft_type	ROUND SINGLE ACTUATOR
shaft_length	2.250 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class	2A SINGLE MOUNTING FACILITY A
overall_width	1.312 INCHES NOMINAL IN
pole_quantity	1 SINGLE SECTION REAR
terminal_type	TAB, SOLDER LUG
thread_length	0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
overall_height	1.448 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
overall_length	3.125 INCHES NOMINAL IN
shaft_diameter	0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM SINGLE ACTUATOR IN
throw_quantity	12 SINGLE SECTION FRONT
mounting_method	THREADED BUSHING SINGLE MOUNTING FACILITY
NSN	5930-00-752-2630

COMPONENT DIAGRAM

KEY FEATURES

•

SHAFT TYPE: ROUND SINGLE ACTUATOR

•

SHAFT DIAMETER: 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM SINGLE ACTUATOR IN

•

SWITCH CONTACT BASIC DESIGN: NONPILE-UP SYMMETRICAL

•

NONTURN DEVICE RADIUS: 0.438 INCHES NOMINAL AT 9:00 OCLOCK IN

•

TERMINAL TYPE: TAB, SOLDER LUG

•

ROTOR THROUGH CONNECTION QUANTITY: 1 SINGLE SECTION

•

CONTACT LOAD CURRENT RATING: 2.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL

TECHNICAL CHARACTERISTICS

SHAFT TYPE	ROUND SINGLE ACTUATOR
OVERALL HEIGHT	1.448 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
SHAFT DIAMETER	0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM SINGLE ACTUATOR IN
SWITCH CONTACT BASIC DESIGN	NONPILE-UP SYMMETRICAL
NONTURN DEVICE RADIUS	0.438 INCHES NOMINAL AT 9:00 OCLOCK IN
TERMINAL TYPE	TAB, SOLDER LUG
ROTOR THROUGH CONNECTION QUANTITY	1 SINGLE SECTION
CONTACT LOAD CURRENT RATING	2.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL
CONTACT LOAD CURRENT RATING	150.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL
MOUNTING METHOD	THREADED BUSHING SINGLE MOUNTING FACILITY

SUBSTITUTES & CROSS-REFERENCES 5

02221-006Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

B150037-0000Reference document

Same NSN cross-reference

Reference document — Secondary reference

PA2001MSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

134592-0000Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

530313-22Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 034-20062-001?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 034-20062-001?

034-20062-001 is a SWITCH,ROTARY. It is classified as a MRO (MRO_GENERAL).

What parts can replace 034-20062-001?

There are 5 known substitutes for 034-20062-001: 02221-006, B150037-0000, PA2001M and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 034-20062-001?

034-20062-001 is cataloged in the U.S. Government catalog under NSN 5930-00-752-2630. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

034-20062-001 — SWITCH,ROTARY

Request a Quote — 034-20062-001