PartsTable
Technical Data Sheet
Download PDF

0334-05 — 0334-05

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

0334-05: 0334-05.

The 0334-05 is a the manufacturer industrial component. Key specifications include special_features: MODULE, OPT I/F,MID-RANGE (J20IF-L2), end_item_identification: BANDWIDTH MANAGER (BWM), part_name_assigned_by_controlling_agency: OPT I/F, MID RANGE. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-486-0289, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 0334-05
NSN: 5305-01-486-0289
NIINs: 014860289, 016003079
FSC: 5305 — Screws
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
special_featuresMODULE, OPT I/F,MID-RANGE (J20IF-L2)
end_item_identificationBANDWIDTH MANAGER (BWM)
part_name_assigned_by_controlling_agencyOPT I/F, MID RANGE
NSN5305-01-486-0289
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 0334-05 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.133 INCHES NOMINAL IN
•
SCREW SURFACE TREATMENT: ZINC
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: DOUBLE CHAMFER
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE IA
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.133 INCHES NOMINAL IN
SCREW SURFACE TREATMENTZINC
FASTENER LENGTH0.750 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEDOUBLE CHAMFER
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLECROSS RECESS TYPE IA
END ITEM IDENTIFICATION2420-66-148-7692, HMEE (HIGH MOBILITY ENGINEER EXCAVATOR)
HEAD DIAMETER0.373 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
90190A245Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 0334-05?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0334-05?
0334-05 is a 0334-05. It is classified as a MRO (MRO_GENERAL).
What parts can replace 0334-05?
There is 1 known substitute for 0334-05: 90190A245. Substitute compatibility should be verified for your specific system.
What is the NSN for 0334-05?
0334-05 is cataloged in the U.S. Government catalog under NSN 5305-01-486-0289. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0334-05

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.