PartsTable / O-RING / 0327-62
0327-62
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
HEATING ELEMENT,ELECTRICAL,NONIM. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, center_hole_diameter: 0.230 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN, elongation_percentage: 331 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-595-6327, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
0327-62
NSN: 5331-00-595-6327 FSC: 5331 — O-RINGCAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR temp_rating -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF hardness_rating 70.0 SHORE DUROMETER A NOMINAL outside_diameter 0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN center_hole_diameter 0.230 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN elongation_percentage 331 MAXIMUM cross-sectional_height 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN NSN 5331-00-595-6327
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 0327-62
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
• ELONGATION PERCENTAGE: 331 MAXIMUM
• OUTSIDE DIAMETER: 0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
• CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
• CENTER HOLE DIAMETER: 0.230 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF ELONGATION PERCENTAGE 331 MAXIMUM OUTSIDE DIAMETER 0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN CROSS-SECTIONAL HEIGHT 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN CENTER HOLE DIAMETER 0.230 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR HARDNESS RATING 70.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
1603061 Interchangeable interchangeable cross-reference
interchangeable
26C30T Interchangeable interchangeable cross-reference
interchangeable
002222 Interchangeable interchangeable cross-reference
interchangeable
2-245N674-70 Interchangeable interchangeable cross-reference
interchangeable
7-775-245000 Interchangeable interchangeable cross-reference
interchangeable
25K40412 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 0327-62?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0327-62?
0327-62 is a HEATING ELEMENT,ELECTRICAL,NONIM.
What parts can replace 0327-62?
There are 33 known substitutes for 0327-62: 1603061, 26C30T, 002222 and 30 more. Substitute compatibility should be verified for your specific system.
Is 0327-62 still available?
0327-62 is currently cancelled.
Request a Quote — 0327-62