PartsTable
Technical Data Sheet
PartsTable / O-RING / 032305
032305 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TORIC MOLD,GLASS BACK is a the manufacturer industrial component. Key specifications include special_features: REPLACEMENT COMPONENT FOR THE GLSBM-180 SYSTEM (GLASS BACK MOLDS), NSN: 6540-01-507-3503; 80MM DIAMETER MM, part_name_assigned_by_controlling_agency: MOLD TORIC GLASS BACK 5.50/0.50 FOR GLSBM-180 SYSTEM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-470-2578, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
032305
NSN: 5331-01-470-2578
FSC: 5331 — O-RING
CAGE: 77640 — ZF ACTIVE SAFETY AND ELECTRONICS US LLC DIV TRW COMMERCIAL STEERING SYSTEMS (USA)
SPECIFICATIONS
special_featuresREPLACEMENT COMPONENT FOR THE GLSBM-180 SYSTEM (GLASS BACK MOLDS), NSN: 6540-01-507-3503; 80MM DIAMETER MM
part_name_assigned_by_controlling_agencyMOLD TORIC GLASS BACK 5.50/0.50 FOR GLSBM-180 SYSTEM
NSN5331-01-470-2578
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 032305 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: AS MODIFIED BY MATERIAL
•
CROSS-SECTIONAL HEIGHT: 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 80 MAXIMUM
•
PERIPHERAL DIAMETER: 0.367 INCHES NOMINAL IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSAS MODIFIED BY MATERIAL
CROSS-SECTIONAL HEIGHT0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
ELONGATION PERCENTAGE80 MAXIMUM
PERIPHERAL DIAMETER0.367 INCHES NOMINAL IN
TEMP RATING-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
2528918Interchangeable
interchangeable cross-reference
interchangeable
MILP5510Interchangeable
interchangeable cross-reference
interchangeable
AMS-P-5510Interchangeable
interchangeable cross-reference
interchangeable
5-131-04-024-00Interchangeable
interchangeable cross-reference
interchangeable
0921206-9Interchangeable
interchangeable cross-reference
interchangeable
5330008037208Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 032305?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 032305?
032305 is a TORIC MOLD,GLASS BACK.
What parts can replace 032305?
There are 25 known substitutes for 032305: 2528918, MILP5510, AMS-P-5510 and 22 more. Substitute compatibility should be verified for your specific system.
Is 032305 still available?
032305 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 032305

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026