PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 03216401
03216401 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 8.5 MILLIMETERS NOMINAL LOCATION NOT OTHERWISE SPECIFIED MM, overall_width: 67.0 MILLIMETERS NOMINAL MM, overall_length: 236.0 MILLIMETERS NOMINAL MM, cross-sectional_thickness: 0.5 MILLIMETERS NOMINAL MM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-099-9008, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
03216401
NSN: 5330-01-099-9008
FSC: 5330
CAGE: 61080 — HATZ DIESEL OF AMERICA INC (USA)
SPECIFICATIONS
hole_diameter8.5 MILLIMETERS NOMINAL LOCATION NOT OTHERWISE SPECIFIED MM
overall_width67.0 MILLIMETERS NOMINAL MM
overall_length236.0 MILLIMETERS NOMINAL MM
bolt_hole_quantity7
cross-sectional_thickness0.5 MILLIMETERS NOMINAL MM
NSN5330-01-099-9008
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 03216401 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT HOLE QUANTITY: 7
•
CROSS-SECTIONAL THICKNESS: 0.5 MILLIMETERS NOMINAL MM
•
HOLE DIAMETER: 8.5 MILLIMETERS NOMINAL LOCATION NOT OTHERWISE SPECIFIED MM
TECHNICAL CHARACTERISTICS (FLIS)
BOLT HOLE QUANTITY7
OVERALL LENGTH236.0 MILLIMETERS NOMINAL MM
CROSS-SECTIONAL THICKNESS0.5 MILLIMETERS NOMINAL MM
HOLE DIAMETER8.5 MILLIMETERS NOMINAL LOCATION NOT OTHERWISE SPECIFIED MM
OVERALL WIDTH67.0 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
130W1Interchangeable
interchangeable cross-reference
interchangeable
82100Interchangeable
interchangeable cross-reference
interchangeable
44460D1Interchangeable
interchangeable cross-reference
interchangeable
32N-50-0-1Interchangeable
interchangeable cross-reference
interchangeable
UG57UInterchangeable
interchangeable cross-reference
interchangeable
374-079-001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 03216401?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 03216401?
03216401 is a GASKET.
What parts can replace 03216401?
There are 10 known substitutes for 03216401: 130W1, 82100, 44460D1 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 03216401?
03216401 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-099-9008. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 03216401

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026