Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
<b>MTP High Density cassettes (compatible with MPO)</b><br><br>- For installation in modular panel Cat. No 0 321 40<br>- Sliding cassettes which can be removed automatically by simply pressing them, simplifying installation and maintenance<br>- Removable from the front and back<br>- High-performance MTP cassettes, low insertion loss<br>- Prewired, equipped at rear with one or two male MTP connectors with 12 fibres<br>- LC or SC connectors at the front<br>- MTP is a registered trademark of US Conec Ltd This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-737-5341, indicating validated use in U.S. government and defense logistics supply chains.
WHERE IT FITS
032144
NSN:5330-00-737-5341 FSC:5330 CAGE:77640 — ZF ACTIVE SAFETY AND ELECTRONICS US LLC DIV TRW COMMERCIAL STEERING SYSTEMS (USA)
SPECIFICATIONS
special_features
MEDIA TEMPLATE; FOR USE PRE-OPERATIONS, TO PLAN OUT THE PROCEDURE; THIS IS FOR THE SYNMESH OPERATIONS; PART OF THE UNIVERSAL SPINAL SYSTEM
part_name_assigned_by_controlling_agency
MEDIA TEMPLATE PREOPERATIVE PLANNER GUIDE FOR SYNMESH OPERATION SPINAL
NSN
5330-00-737-5341
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.312 INCHES NOMINAL IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: U
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 2BG725BE3F1 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM D2000 2BG715BE3 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
PERIPHERAL DIAMETER: 1.377 INCHES MINIMUM AND 1.379 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.865 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
•
HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT
0.312 INCHES NOMINAL IN
MATERIAL
RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
CROSS-SECTIONAL SHAPE STYLE
U
MATERIAL DOCUMENT AND CLASSIFICATION
ASTM D2000 2BG725BE3F1 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM D2000 2BG715BE3 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PERIPHERAL DIAMETER
1.377 INCHES MINIMUM AND 1.379 INCHES MAXIMUM IN
CENTER HOLE DIAMETER
0.865 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
HARDNESS RATING
65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 032144?
032144 is a PLANNER,TEMPLATE,PREOPERATIVE manufactured by Legrand.
What parts can replace 032144?
There are 8 known substitutes for 032144: 50115, 80-1816, 5080 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 032144?
032144 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-737-5341. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.