PartsTable
Technical Data Sheet
PartsTable / O-RING / 031896
031896 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: TITANIUM OVERALL, special_features: SOLID HUMERAL NAIL; SIZE: 9.5MM BY 270MM; STERILE MM, part_name_assigned_by_controlling_agency: NAIL BONE HUMERAL TI 9.5MM BY 270MM MM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-379-1059, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
031896
NSN: 5331-01-379-1059
FSC: 5331 — O-RING
CAGE: 16583 — GH BETTIS A GALVESTON-HOUSTON CO (USA)
SPECIFICATIONS
materialTITANIUM OVERALL
special_featuresSOLID HUMERAL NAIL; SIZE: 9.5MM BY 270MM; STERILE MM
part_name_assigned_by_controlling_agencyNAIL BONE HUMERAL TI 9.5MM BY 270MM MM
NSN5331-01-379-1059
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 031896 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 3.417 INCHES MINIMUM AND 3.469 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER3.417 INCHES MINIMUM AND 3.469 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
5979Interchangeable
interchangeable cross-reference
interchangeable
6500Interchangeable
interchangeable cross-reference
interchangeable
922252-1Interchangeable
interchangeable cross-reference
interchangeable
201HInterchangeable
interchangeable cross-reference
interchangeable
7903320-00Interchangeable
interchangeable cross-reference
interchangeable
5945PL0935488Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 031896?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 031896?
031896 is a O-RING.
What parts can replace 031896?
There are 15 known substitutes for 031896: 5979, 6500, 922252-1 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 031896?
031896 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-379-1059. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 031896

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026