PartsTable
Technical Data Sheet
03156 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include base_style: WEDGE, bulb_style: S (STRAIGHT SIDE), overall_length: 2.120 INCHES MAXIMUM IN, voltage_rating: 12.800 VOLTS NOMINAL, bulb_designator: GT-8, rated_average_life: HOURS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-022-2582, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
03156
NSN: 5330-00-022-2582
FSC: 5330
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
base_styleWEDGE
bulb_styleS (STRAIGHT SIDE)
overall_length2.120 INCHES MAXIMUM IN
voltage_rating12.800 VOLTS NOMINAL
bulb_designatorGT-8
rated_average_lifeHOURS
light_center_length1.100 INCHES NOMINAL IN
light_output_rating32.000 SPHERICAL CANDLEPOWER NOMINAL SINGLE RATING
filament_designationC-6
average_life_rating_in_hours1200.0
emitted_light_characteristicCOLORLESS
current_rating_for_which_designed2.100 AMPERES NOMINAL
NSN5330-00-022-2582
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 03156 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
MILR15624Interchangeable
interchangeable cross-reference
interchangeable
MIL-G-15624Interchangeable
interchangeable cross-reference
interchangeable
4262-63REVBPC17Interchangeable
interchangeable cross-reference
interchangeable
704-5940675 PCInterchangeable
interchangeable cross-reference
interchangeable
17-J-3006 PIECE 23Interchangeable
interchangeable cross-reference
interchangeable
PO0180NRPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 03156?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 03156?
03156 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 03156?
There are 16 known substitutes for 03156: MILR15624, MIL-G-15624, 4262-63REVBPC17 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 03156?
03156 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-022-2582. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 03156