PartsTable
Technical Data Sheet
Download PDF

03099-10406AL — PLUNGER,QUICK RELEASE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

03099-10406AL: PLUNGER,QUICK RELEASE.

The PLUNGER,QUICK RELEASE is a the manufacturer industrial component. Key specifications include shape: ROUND, material: STEEL CORROSION RESISTING BODY, overall_width: 0.236 INCHES NOMINAL IN, overall_length: 1.500 INCHES NOMINAL IN, end_pressure_rating: 1.8 POUNDS MINIMUM AND 3.2 POUNDS MAXIMUM LBS, nominal_thread_size: 0.375 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-649-9332, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
03099-10406AL
NSN: 5340-01-649-9332
FSC: 5340 — Hardware, Commercial
CAGE: 4EGD1 — FIXTUREWORKS, LLC (USA)
SPECIFICATIONS
shapeROUND
materialSTEEL CORROSION RESISTING BODY
overall_width0.236 INCHES NOMINAL IN
overall_length1.500 INCHES NOMINAL IN
end_pressure_rating1.8 POUNDS MINIMUM AND 3.2 POUNDS MAXIMUM LBS
nominal_thread_size0.375 INCHES IN
end_item_identification1015-01-598-4568
thread_quantity_per_inch24
part_name_assigned_by_controlling_agencyPLUNGER,INDEXING
NSN5340-01-649-9332
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 03099-10406AL MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHAPE: ROUND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
THREAD QUANTITY PER INCH: 24
•
MATERIAL: STEEL CORROSION RESISTING BODY
TECHNICAL CHARACTERISTICS
SHAPEROUND
OVERALL LENGTH1.500 INCHES NOMINAL IN
OVERALL WIDTH0.236 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.375 INCHES IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPLUNGER,INDEXING
END ITEM IDENTIFICATION1015-01-598-4568
THREAD QUANTITY PER INCH24
MATERIALSTEEL CORROSION RESISTING BODY
MATERIALSTEEL CORROSION RESISTING SPRING
END PRESSURE RATING1.8 POUNDS MINIMUM AND 3.2 POUNDS MAXIMUM LBS
SUBSTITUTES & CROSS-REFERENCES 3
13027269Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
KBP-771Reference document
Same NSN cross-reference
Reference document — Secondary reference
13027269-1Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 03099-10406AL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 03099-10406AL?
03099-10406AL is a PLUNGER,QUICK RELEASE.
What parts can replace 03099-10406AL?
There are 3 known substitutes for 03099-10406AL: 13027269, KBP-771, 13027269-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 03099-10406AL?
03099-10406AL is cataloged in the U.S. Government catalog under NSN 5340-01-649-9332. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 03099-10406AL

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.