PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 03066
03066 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The RUBBER STRIP is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, end_style: RAISED HOOK BOTH ENDS, design_type: OPEN, hook_radius: 0.0625 INCHES NOMINAL BOTH ENDS IN, opening_width: 0.0125 INCHES NOMINAL BOTH ENDS IN, inside_diameter: 0.0937 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-208-1102, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
03066
NSN: 5306-00-208-1102
FSC: 5306
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
end_styleRAISED HOOK BOTH ENDS
design_typeOPEN
hook_radius0.0625 INCHES NOMINAL BOTH ENDS IN
opening_width0.0125 INCHES NOMINAL BOTH ENDS IN
inside_diameter0.0937 INCHES NOMINAL IN
style_designatorCYLINDRICAL
surface_treatmentPASSIVATE OVERALL
spring_free_length1.1562 INCHES NOMINAL IN
coil_helix_directionRIGHT-HAND
spring_free_outside_diameter0.1250 INCHES NOMINAL IN
NSN5306-00-208-1102
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 03066 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH BETWEEN FLATS: 0.620 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
FASTENER LENGTH: 6.300 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.100 INCHES NOMINAL IN
•
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.612 INCHES NOMINAL FIRST HOLE IN
•
MATERIAL: STEEL COMP 2330 OVERALL
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH BETWEEN FLATS0.620 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.312 INCHES IN
SURFACE TREATMENTCADMIUM OVERALL
FASTENER LENGTH6.300 INCHES NOMINAL IN
HEAD HEIGHT0.100 INCHES NOMINAL IN
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER0.612 INCHES NOMINAL FIRST HOLE IN
MATERIALSTEEL COMP 2330 OVERALL
THREAD DIRECTIONRIGHT-HAND
HEAD DIAMETER0.750 INCHES NOMINAL IN
SHOULDER LENGTH5.700 INCHES NOMINAL FIRST SHOULDER IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
03066Interchangeable
interchangeable cross-reference
interchangeable
3066Interchangeable
interchangeable cross-reference
interchangeable
C2UT345Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 03066?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 03066?
03066 is a RUBBER STRIP.
What parts can replace 03066?
There are 3 known substitutes for 03066: 03066, 3066, C2UT345. Substitute compatibility should be verified for your specific system.
What is the NSN for 03066?
03066 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-208-1102. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 03066

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026