PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 03062
03062 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL AND GRAPHITE OVERALL, outside_diameter: 2.688 INCHES NOMINAL2.688 INCHES NOMINAL IN, aperture_diameter: 1.750 INCHES NOMINAL1.750 INCHES NOMINAL IN, cross-sectional_thickness: 0.170 INCHES MINIMUM AND 0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM0.180 INCHES MAXIMUM IN, environmental_attribute_code: ASBESTOS ALTERNATIVE PRODUCTSASBESTOS ALTERNATIVE PRODUCTS, material_document_and_classification: MIL-P-24503, TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-9817, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
03062
NSN: 3110-00-100-9817
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL AND GRAPHITE OVERALL
outside_diameter2.688 INCHES NOMINAL2.688 INCHES NOMINAL IN
aperture_diameter1.750 INCHES NOMINAL1.750 INCHES NOMINAL IN
cross-sectional_thickness0.170 INCHES MINIMUM AND 0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM0.180 INCHES MAXIMUM IN
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTSASBESTOS ALTERNATIVE PRODUCTS
material_document_and_classificationMIL-P-24503, TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN3110-00-100-9817
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 03062 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.0460 INCHES NOMINAL IN
•
CONE WIDTH: 0.5780 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
BORE DIAMETER: 0.6250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.0460 INCHES NOMINAL IN
CONE WIDTH0.5780 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
BORE DIAMETER0.6250 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
SM-B-148353Interchangeable
interchangeable cross-reference
interchangeable
50829Interchangeable
interchangeable cross-reference
interchangeable
22007750Interchangeable
interchangeable cross-reference
interchangeable
03062Interchangeable
interchangeable cross-reference
interchangeable
JSFQ05Interchangeable
interchangeable cross-reference
interchangeable
JSFQ05-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 03062?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 03062?
03062 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 03062?
There are 10 known substitutes for 03062: SM-B-148353, 50829, 22007750 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 03062?
03062 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-9817. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 03062

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026