PartsTable
Technical Data Sheet
PartsTable / MRO / 03028
03028 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include width: 0.438 INCHES NOMINAL IN, height: 0.229 INCHES NOMINAL IN, length: 0.799 INCHES NOMINAL IN, material: CERAMIC CASE, body_style: CHIP TYPE, body_width: 0.032 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-625-7602, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 03028
NSN: 5340-00-625-7602
FSC: 5340
CAGE: 96152 — BORG-WARNER CORP MARVEL-SCHEBLER/TILLOTSON DIV (USA)
SPECIFICATIONS
width0.438 INCHES NOMINAL IN
height0.229 INCHES NOMINAL IN
length0.799 INCHES NOMINAL IN
materialCERAMIC CASE
body_styleCHIP TYPE
body_width0.032 INCHES NOMINAL IN
body_height0.036 INCHES NOMINAL IN
body_length0.063 INCHES NOMINAL IN
hole_diameter0.188 INCHES NOMINAL IN
shaft_end_typeOPEN
furnished_itemsLOCKNUT
terminal_length0.014 INCHES NOMINAL IN
NSN5340-00-625-7602
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 03028 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.799 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-698,COND CRCQ OR HRPO FED SPEC SINGLE MATERIAL RESPONSE
•
WIDTH: 0.438 INCHES NOMINAL IN
•
HEIGHT: 0.229 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
FURNISHED ITEMS: LOCKNUT
•
HOLE DIAMETER: 0.188 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH0.799 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-698,COND CRCQ OR HRPO FED SPEC SINGLE MATERIAL RESPONSE
WIDTH0.438 INCHES NOMINAL IN
HEIGHT0.229 INCHES NOMINAL IN
MATERIALSTEEL
FURNISHED ITEMSLOCKNUT
HOLE DIAMETER0.188 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
136741R1Upgraded Successor
successor cross-reference
successor
202587Upgraded Successor
successor cross-reference
successor
12002P11Upgraded Successor
successor cross-reference
successor
3028Interchangeable
interchangeable cross-reference
interchangeable
03028Interchangeable
interchangeable cross-reference
interchangeable
14619Interchangeable
Bluetooth Headset - Headset - Kabellos
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 03028?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 03028?
03028 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 03028?
There are 11 known substitutes for 03028: 136741R1, 202587, 12002P11 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 03028?
03028 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-625-7602. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 03028

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026