PartsTable
Technical Data Sheet
Download PDF

03004A67 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

03004A67: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.150 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN, material: STEEL COMP 1095 OVERALL, overall_height: 2.268 INCHES NOMINAL IN, material_thickness: 0.156 INCHES NOMINAL IN, loop/holding_dimension: 0.686 INCHES NOMINAL IN, distance_from_loop_center_to_end: 1.769 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-414-2487, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
03004A67
NSN: 5340-00-414-2487
FSC: 5340 — Hardware, Commercial
CAGE: 66503 — WOODWARD, INC. DIV FUEL SYSTEMS AND CONTROLS (USA)
SPECIFICATIONS
width0.150 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
materialSTEEL COMP 1095 OVERALL
overall_height2.268 INCHES NOMINAL IN
material_thickness0.156 INCHES NOMINAL IN
loop/holding_dimension0.686 INCHES NOMINAL IN
distance_from_loop_center_to_end1.769 INCHES NOMINAL IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-414-2487
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 03004A67 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.686 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.156 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 1.769 INCHES NOMINAL IN
•
WIDTH: 0.150 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1095 OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT2.268 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.686 INCHES NOMINAL IN
MATERIAL THICKNESS0.156 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END1.769 INCHES NOMINAL IN
WIDTH0.150 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1095 OVERALL
SUBSTITUTES & CROSS-REFERENCES 7
FSA17-1CPC61Reference document
Same NSN cross-reference
Reference document — Secondary reference
191328AReference document
Same NSN cross-reference
Reference document — Secondary reference
FSL17-1CPC61Reference document
Same NSN cross-reference
Reference document — Secondary reference
191328Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3279552Reference document
Same NSN cross-reference
Reference document — Secondary reference
2F6770Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 03004A67?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 03004A67?
03004A67 is a CLIP,SPRING TENSION.
What parts can replace 03004A67?
There are 7 known substitutes for 03004A67: FSA17-1CPC61, 191328A, FSL17-1CPC61 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 03004A67?
03004A67 is cataloged in the U.S. Government catalog under NSN 5340-00-414-2487. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 03004A67

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.