PartsTable
Technical Data Sheet
Download PDF

030049A — LEVER,REMOTE CONTROL

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

030049A: LEVER,REMOTE CONTROL.

The LEVER,REMOTE CONTROL is a the manufacturer industrial component. Key specifications include material: STEEL, overall_width: 0.438 INCHES NOMINAL IN, special_features: FORK IN SHAFT END 0.375 IN. LG,FORKS IN SIDES 0.281 IN.

LG IN LINK END,0.219 IN. LG IN SHAFT END IN, link_end_thickness: 0.375 INCHES NOMINAL IN, shaft_end_thickness: 0.375 INCHES NOMINAL IN, link_end_hole_diameter: 0.156 INCHES MINIMUM AND 0.157 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3040-00-365-8485, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
030049A
NSN: 3040-00-365-8485
FSC: 3040 — Miscellaneous Power Transmission Equipment
CAGE: 66503 — WOODWARD, INC. DIV FUEL SYSTEMS AND CONTROLS (USA)
SPECIFICATIONS
materialSTEEL
overall_width0.438 INCHES NOMINAL IN
special_featuresFORK IN SHAFT END 0.375 IN. LG,FORKS IN SIDES 0.281 IN. LG IN LINK END,0.219 IN. LG IN SHAFT END IN
link_end_thickness0.375 INCHES NOMINAL IN
shaft_end_thickness0.375 INCHES NOMINAL IN
link_end_hole_diameter0.156 INCHES MINIMUM AND 0.157 INCHES MAXIMUM IN
distance_between_fork_inside_spread0.187 INCHES NOMINAL IN
NSN3040-00-365-8485
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available LEVER,REMOTE CONTROL TITLE COMPONENT PN 030049A MFR LEVER,REMOTE CONTROL
KEY FEATURES
•
LINK END THICKNESS: 0.375 INCHES NOMINAL IN
•
LINK END HOLE DIAMETER: 0.156 INCHES MINIMUM AND 0.157 INCHES MAXIMUM IN
•
SHAFT END THICKNESS: 0.375 INCHES NOMINAL IN
•
DISTANCE BETWEEN FORK INSIDE SPREAD: 0.187 INCHES NOMINAL IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
LINK END THICKNESS0.375 INCHES NOMINAL IN
LINK END HOLE DIAMETER0.156 INCHES MINIMUM AND 0.157 INCHES MAXIMUM IN
SHAFT END THICKNESS0.375 INCHES NOMINAL IN
OVERALL WIDTH0.438 INCHES NOMINAL IN
DISTANCE BETWEEN FORK INSIDE SPREAD0.187 INCHES NOMINAL IN
SPECIAL FEATURESFORK IN SHAFT END 0.375 IN. LG,FORKS IN SIDES 0.281 IN. LG IN LINK END,0.219 IN. LG IN SHAFT END IN
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 2
030049Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
03040-39Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 030049A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 030049A?
030049A is a LEVER,REMOTE CONTROL.
What parts can replace 030049A?
There are 2 known substitutes for 030049A: 030049, 03040-39. Substitute compatibility should be verified for your specific system.
What is the NSN for 030049A?
030049A is cataloged in the U.S. Government catalog under NSN 3040-00-365-8485. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 030049A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.