PartsTable
Technical Data Sheet
PartsTable / MRO / 030-3197-007
030-3197-007 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The 030-3197-007 is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY BODY, pin_length: 0.808 INCHES MINIMUM AND 0.819 INCHES MAXIMUM IN, pin_diameter: 0.093 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN, overall_length: 1.110 INCHES NOMINAL IN, mounting_method: FORCE FIT, overall_diameter: 0.186 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-197-2350, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 030-3197-007
NSN: 5999-00-197-2350
FSC: 5999
CAGE: 71468 — ITT CANNON LLC (USA)
SPECIFICATIONS
materialCOPPER ALLOY BODY
pin_length0.808 INCHES MINIMUM AND 0.819 INCHES MAXIMUM IN
pin_diameter0.093 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
overall_length1.110 INCHES NOMINAL IN
mounting_methodFORCE FIT
overall_diameter0.186 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
special_featuresBASIC ITEM IDENTIFICATION NUMBER BIN-213
style_designatorPIN CONTACT
precious_materialGOLD
surface_treatmentGOLD AND COPPER BODY
cable_entrance_diameter0.098 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
retention_groove_diameter0.147 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
NSN5999-00-197-2350
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 030-3197-007 MFR 030-3197-007
KEY FEATURES
•
SURFACE TREATMENT: GOLD AND COPPER BODY
•
SPECIFICATION/STANDARD DATA: 81349-MIL-C-39029/29 GOVERNMENT SPECIFICATION
•
PRECIOUS MATERIAL AND LOCATION: BODY AND CONTACT SURFACES GOLD
•
PIN DIAMETER: 0.093 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
•
PIN LENGTH: 0.808 INCHES MINIMUM AND 0.819 INCHES MAXIMUM IN
•
TEST DATA DOCUMENT: 81349-MIL-C-39029 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
OVERALL DIAMETER: 0.186 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY BODY
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTGOLD AND COPPER BODY
SPECIFICATION/STANDARD DATA81349-MIL-C-39029/29 GOVERNMENT SPECIFICATION
PRECIOUS MATERIAL AND LOCATIONBODY AND CONTACT SURFACES GOLD
PIN DIAMETER0.093 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
PIN LENGTH0.808 INCHES MINIMUM AND 0.819 INCHES MAXIMUM IN
TEST DATA DOCUMENT81349-MIL-C-39029 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
OVERALL DIAMETER0.186 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY BODY
PRECIOUS MATERIALGOLD
TERMINAL TYPE AND QUANTITY1 CRIMP AXIALLY AT ONE END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
030-3196-008Upgraded Successor
successor cross-reference
successor
M39029/29-212Upgraded Successor
successor cross-reference
successor
352250042703Upgraded Successor
successor cross-reference
successor
M39029/29-213Upgraded Successor
successor cross-reference
successor
BIN-213Upgraded Successor
successor cross-reference
successor
21-33123-564Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 030-3197-007?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 030-3197-007?
030-3197-007 is a 030-3197-007. It is classified as a MRO (MRO_GENERAL).
What parts can replace 030-3197-007?
There are 25 known substitutes for 030-3197-007: 030-3196-008, M39029/29-212, 352250042703 and 22 more. Substitute compatibility should be verified for your specific system.
Is 030-3197-007 still available?
030-3197-007 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 030-3197-007

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026