PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 03-6014-01
03-6014-01 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include end_item_identification: 5895-01-551-3530; TERMINAL, SATELLITE COMMUNICATION (SWAN D V2), part_name_assigned_by_controlling_agency: HANDLE ASSY. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-184-0004, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
03-6014-01
NSN: 3110-01-184-0004
FSC: 3110
CAGE: 31435 — LUCAS AEROSPACE POWER EQUIPMENT CORPORATION (USA)
SPECIFICATIONS
end_item_identification5895-01-551-3530; TERMINAL, SATELLITE COMMUNICATION (SWAN D V2)
part_name_assigned_by_controlling_agencyHANDLE ASSY
NSN3110-01-184-0004
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 03-6014-01 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 0.3746 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
•
LUBRICATION MATERIAL: GREASE
•
LOAD DIRECTION: RADIAL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
MATERIAL: STEEL COMP 302 CAGE
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER0.3746 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONPACER GYM GLCM
LUBRICATION MATERIALGREASE
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
MATERIALSTEEL COMP 302 CAGE
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
SHIELD QUANTITY2
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
77R2X1266AP17Interchangeable
interchangeable cross-reference
interchangeable
102-5532P1Interchangeable
interchangeable cross-reference
interchangeable
33KDD3Interchangeable
interchangeable cross-reference
interchangeable
P9618500-19Interchangeable
interchangeable cross-reference
interchangeable
77R2X1SInterchangeable
interchangeable cross-reference
interchangeable
6157-P-36-13Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 03-6014-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 03-6014-01?
03-6014-01 is a BEARING,BALL,ANNULAR.
What parts can replace 03-6014-01?
There are 8 known substitutes for 03-6014-01: 77R2X1266AP17, 102-5532P1, 33KDD3 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 03-6014-01?
03-6014-01 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-184-0004. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 03-6014-01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026