PartsTable
Technical Data Sheet
Download PDF

03-506-10E-004 — BEARING,PLAIN,SELF-ALIGNING

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

03-506-10E-004: BEARING,PLAIN,SELF-ALIGNING.

The BEARING,PLAIN,SELF-ALIGNING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C AND STEEL COMP 630 OVERALL, bore_diameter: 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN, special_features: DRY FILM LUBRICANT PER MIL-L-81329, style_designator: WITHOUT INSERT OR LINER WITH STAKING GROOVE, inner_member_width: 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN, outer_member_width: 0.6150 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-137-7129, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
03-506-10E-004
NSN: 3120-01-137-7129
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 09455 — RBC TRANSPORT DYNAMICS CORP DIV RBC TRANSPORT DYNAMICS (USA)
SPECIFICATIONS
materialSTEEL COMP 440C AND STEEL COMP 630 OVERALL
bore_diameter0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
special_featuresDRY FILM LUBRICANT PER MIL-L-81329
style_designatorWITHOUT INSERT OR LINER WITH STAKING GROOVE
inner_member_width0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
outer_member_width0.6150 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
end_item_identificationF/A-18
outer_member_outside_diameter1.1870 INCHES MINIMUM AND 1.1875 INCHES MAXIMUM IN
material_document_and_classificationAMS5630/5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN3120-01-137-7129
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 03-506-10E-004 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 8
KWB10-41Reference document
Same NSN cross-reference
Reference document — Secondary reference
ABW10V-105Reference document
Same NSN cross-reference
Reference document — Secondary reference
14-5018-10Reference document
Same NSN cross-reference
Reference document — Secondary reference
03-506-10E-007Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
ST4M211-10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10130632Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 03-506-10E-004?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 03-506-10E-004?
03-506-10E-004 is a BEARING,PLAIN,SELF-ALIGNING.
What parts can replace 03-506-10E-004?
There are 8 known substitutes for 03-506-10E-004: KWB10-41, ABW10V-105, 14-5018-10 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 03-506-10E-004?
03-506-10E-004 is cataloged in the U.S. Government catalog under NSN 3120-01-137-7129. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 03-506-10E-004