PartsTable
Technical Data Sheet
PartsTable / MRO / 03-3041
03-3041 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

The CAPACITOR is a the manufacturer cache protection component designed to preserve data integrity during power loss events in enterprise server and storage controller environments. Key specifications include phase: SINGLE, length: 1.546 INCHES NOMINAL IN, material: ALUMINUM OVERALL, drive_type: DIRECT, construction: ONE-PIECE, air_flow_rate: 118.0 CUBIC FEET PER MINUTE MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5365-00-741-2377, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 03-3041
NSN: 5365-00-741-2377
FSC: 5365
CAGE: 77640 — ZF ACTIVE SAFETY AND ELECTRONICS US LLC DIV TRW COMMERCIAL STEERING SYSTEMS (USA)
SPECIFICATIONS
phaseSINGLE
length1.546 INCHES NOMINAL IN
materialALUMINUM OVERALL
drive_typeDIRECT
constructionONE-PIECE
air_flow_rate118.0 CUBIC FEET PER MINUTE MAXIMUM
hole_diameter0.3280 INCHES NOMINAL IN
overall_width2.5620 INCHES NOMINAL IN
flow_directionOUTWARD
inclosure_typeFULLY INCLOSED
overall_length2.6250 INCHES NOMINAL IN
prime_mover_typeELECTRIC MOTOR
NSN5365-00-741-2377
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CAPACITOR TITLE COMPONENT PN 03-3041 MFR CAPACITOR
KEY FEATURES
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.312 INCHES NOMINAL IN
•
FSC APPLICATION DATA: STEERING GEAR HOUSING TOP COVER,TRUCK CARGO
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 2.000 INCHES NOMINAL IN
•
APERTURE DIAMETER: 2.0780 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1009 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1013 OR STEEL COMP 1019 OR STEEL COMP 1020
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.312 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESSIDE RADIUS FROM CENTER OF SHIM IS 1.281 IN. IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.312 INCHES NOMINAL IN
FSC APPLICATION DATASTEERING GEAR HOUSING TOP COVER,TRUCK CARGO
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH2.000 INCHES NOMINAL IN
OVERALL LENGTH2.6250 INCHES NOMINAL IN
APERTURE DIAMETER2.0780 INCHES NOMINAL IN
MATERIALSTEEL COMP 1009 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1013 OR STEEL COMP 1019 OR STEEL COMP 1020
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.312 INCHES NOMINAL IN
CONSTRUCTIONONE-PIECE
OUTSIDE CORNER RADIUS0.3120 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
6330Interchangeable
interchangeable cross-reference
interchangeable
MIL-F-2692Interchangeable
interchangeable cross-reference
interchangeable
69200Interchangeable
interchangeable cross-reference
interchangeable
685-69200Interchangeable
interchangeable cross-reference
interchangeable
47311-209Interchangeable
interchangeable cross-reference
interchangeable
563-4822-932775PC4-5-11Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 03-3041?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 03-3041?
03-3041 is a CAPACITOR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 03-3041?
There are 17 known substitutes for 03-3041: 6330, MIL-F-2692, 69200 and 14 more. Substitute compatibility should be verified for your specific system.
Is 03-3041 still available?
03-3041 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 03-3041

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026