03-2305 — TORIC MOLD,GLASS BACK

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

03-2305: TORIC MOLD,GLASS BACK.

The TORIC MOLD,GLASS BACK is a the manufacturer industrial component. Key specifications include special_features: REPLACEMENT COMPONENT FOR THE GLSBM-180 SYSTEM (GLASS BACK MOLDS), NSN: 6540-01-507-3503; 80MM DIAMETER MM, part_name_assigned_by_controlling_agency: MOLD TORIC GLASS BACK 5.50/0.50 FOR GLSBM-180 SYSTEM. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-470-2578, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

03-2305

NSN: 5331-01-470-2578
NIINs: 014702578, 015151333
FSC: 5331 — O-ring
CAGE: 77640 — ZF ACTIVE SAFETY AND ELECTRONICS US LLC DIV TRW COMMERCIAL STEERING SYSTEMS (USA)

SPECIFICATIONS

special_features	REPLACEMENT COMPONENT FOR THE GLSBM-180 SYSTEM (GLASS BACK MOLDS), NSN: 6540-01-507-3503; 80MM DIAMETER MM
part_name_assigned_by_controlling_agency	MOLD TORIC GLASS BACK 5.50/0.50 FOR GLSBM-180 SYSTEM
NSN	5331-01-470-2578

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN

•

HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 80 MAXIMUM

•

PERIPHERAL DIAMETER: 0.367 INCHES NOMINAL IN

•

CENTER HOLE DIAMETER: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SYNTHETIC

•

REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: AS MODIFIED BY MATERIAL

TECHNICAL CHARACTERISTICS

TEMP RATING	-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
HARDNESS RATING	90.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	80 MAXIMUM
PERIPHERAL DIAMETER	0.367 INCHES NOMINAL IN
CENTER HOLE DIAMETER	0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
MATERIAL	RUBBER SYNTHETIC
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS	AS MODIFIED BY MATERIAL

SUBSTITUTES & CROSS-REFERENCES 4

AS2778Reference document

Same NSN cross-reference

Reference document — Secondary reference

5330PL1036716Reference document

Same NSN cross-reference

Reference document — Informative reference only

MS28778-2Reference document

Same NSN cross-reference

Reference document — Secondary reference

AMS-P-5510Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Shelf-life managedAcquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy 03-2305?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 03-2305?

03-2305 is a TORIC MOLD,GLASS BACK.

What parts can replace 03-2305?

There are 4 known substitutes for 03-2305: AS2778, 5330PL1036716, MS28778-2 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 03-2305?

03-2305 is cataloged in the U.S. Government catalog under NSN 5331-01-470-2578. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

03-2305 — TORIC MOLD,GLASS BACK

Request a Quote — 03-2305