PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 03-2075
03-2075 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include part_name_assigned_by_controlling_agency: RETRACTOR SWIVEL FENCE 4 INCHES BY 6 INCHES (1) PER PACKAGE IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-286-6854, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
03-2075
NSN: 5330-00-286-6854
FSC: 5330
CAGE: 77640 — ZF ACTIVE SAFETY AND ELECTRONICS US LLC DIV TRW COMMERCIAL STEERING SYSTEMS (USA)
SPECIFICATIONS
special_features4 INCHES BY 6 INCHES FENCE SWIVEL RETRACTOR; FOR USE WITH THE GF400 FASTSTSYSTEM GENERAL AND GF450 EXPANDED GENERAL RETRACTOR SYSTEM IN
part_name_assigned_by_controlling_agencyRETRACTOR SWIVEL FENCE 4 INCHES BY 6 INCHES (1) PER PACKAGE IN
NSN5330-00-286-6854
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 03-2075 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1600 FEET PER MINUTE FT
•
SEAL WIDTH: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 1.309 INCHES MINIMUM AND 1.311 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT DIAMETER: 0.875 INCHES NOMINAL IN
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
•
CASE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1600 FEET PER MINUTE FT
SEAL WIDTH0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER1.309 INCHES MINIMUM AND 1.311 INCHES MAXIMUM IN
ACCOMMODATED SHAFT DIAMETER0.875 INCHES NOMINAL IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
CASE STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
AC183-1 1-2Interchangeable
interchangeable cross-reference
interchangeable
281-31Interchangeable
interchangeable cross-reference
interchangeable
639095Interchangeable
interchangeable cross-reference
interchangeable
CVCPICInterchangeable
interchangeable cross-reference
interchangeable
3772Interchangeable
interchangeable cross-reference
interchangeable
03-2075Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 03-2075?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 03-2075?
03-2075 is a SEAL,PLAIN ENCASED.
What parts can replace 03-2075?
There are 10 known substitutes for 03-2075: AC183-1 1-2, 281-31, 639095 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 03-2075?
03-2075 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-286-6854. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 03-2075

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026