PartsTable
Technical Data Sheet
Download PDF

029670-1 — ROD,STRAIGHT,HEADLESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

029670-1: ROD,STRAIGHT,HEADLESS.

The ROD,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include chamfer_angle: 30.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED, chamfer_length: 0.030 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_length: 17.000 INCHES NOMINAL IN, overall_diameter: 0.187 INCHES NOMINAL IN, surface_treatment: PRIMER PIN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-521-1752, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
029670-1
NSN: 5340-01-521-1752
FSC: 5340 — Hardware, Commercial
CAGE: 62228 — MEGGITT DEFENSE SYSTEMS, INC. DBA MEGGITT DEFENSE SYSTEMS INC (USA)
SPECIFICATIONS
chamfer_angle30.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
chamfer_length0.030 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_length17.000 INCHES NOMINAL IN
overall_diameter0.187 INCHES NOMINAL IN
surface_treatmentPRIMER PIN
NSN5340-01-521-1752
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 029670-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.030 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OVERALL DIAMETER: 0.187 INCHES NOMINAL IN
•
SURFACE TREATMENT: PRIMER PIN
•
CHAMFER ANGLE: 30.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.030 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL DIAMETER0.187 INCHES NOMINAL IN
OVERALL LENGTH17.000 INCHES NOMINAL IN
SURFACE TREATMENTPRIMER PIN
CHAMFER ANGLE30.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
SUBSTITUTES & CROSS-REFERENCES 1
029670Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 029670-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 029670-1?
029670-1 is a ROD,STRAIGHT,HEADLESS.
What parts can replace 029670-1?
There is 1 known substitute for 029670-1: 029670. Substitute compatibility should be verified for your specific system.
What is the NSN for 029670-1?
029670-1 is cataloged in the U.S. Government catalog under NSN 5340-01-521-1752. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 029670-1