PartsTable
Technical Data Sheet
Download PDF

02929 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

02929: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_type: DRILLED, head_style: FLAT FILLISTER, head_height: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-339-8922, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
02929
NSN: 5305-01-339-8922
FSC: 5305 — Screws
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_typeDRILLED
head_styleFLAT FILLISTER
head_height0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
hole_diameter0.044 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
hole_quantity3
thread_length1.065 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
fastener_length2.565 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
width_across_flats0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN
NSN5305-01-339-8922
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 02929 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
•
FASTENER LENGTH: 2.565 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN
•
THREAD LENGTH: 1.065 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
•
HOLE CONFIGURATION STYLE: ROUND INTERNAL HEXAGON
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT FILLISTER
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN
HEAD HEIGHT0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
FASTENER LENGTH2.565 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN
THREAD LENGTH1.065 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
HOLE CONFIGURATION STYLEROUND INTERNAL HEXAGON
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT FILLISTER
THREAD DIRECTIONRIGHT-HAND
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLEHEXAGON
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
1039-823Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 02929?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 02929?
02929 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 02929?
There is 1 known substitute for 02929: 1039-823. Substitute compatibility should be verified for your specific system.
What is the NSN for 02929?
02929 is cataloged in the U.S. Government catalog under NSN 5305-01-339-8922. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 02929

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.