PartsTable
Technical Data Sheet
Download PDF

02922 — GASKET,SPIRAL WOUND

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

02922: GASKET,SPIRAL WOUND.

The GASKET,SPIRAL WOUND is a the manufacturer industrial component. Key specifications include outside_diameter: 1.438 INCHES NOMINAL IN, special_features: MATERIAL SHALL BE METALLIC FLEXIBLE GRAPHITE, style_designator: CIRCULAR, aperture_diameter: 0.938 INCHES NOMINAL IN, cross-sectional_thickness: 0.175 INCHES NOMINAL IN, cross-sectional_shape_style: METAL WINDING W/ SOFT FILLER. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-408-6417, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
02922
NSN: 5330-01-408-6417
FSC: 5330 — Packing and Gasket Materials
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
outside_diameter1.438 INCHES NOMINAL IN
special_featuresMATERIAL SHALL BE METALLIC FLEXIBLE GRAPHITE
style_designatorCIRCULAR
aperture_diameter0.938 INCHES NOMINAL IN
cross-sectional_thickness0.175 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL WINDING W/ SOFT FILLER
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
NSN5330-01-408-6417
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 02922 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.175 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: METAL WINDING W/ SOFT FILLER
•
OUTSIDE DIAMETER: 1.438 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.938 INCHES NOMINAL IN
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.175 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLEMETAL WINDING W/ SOFT FILLER
OUTSIDE DIAMETER1.438 INCHES NOMINAL IN
APERTURE DIAMETER0.938 INCHES NOMINAL IN
SPECIAL FEATURESMATERIAL SHALL BE METALLIC FLEXIBLE GRAPHITE
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
SUBSTITUTES & CROSS-REFERENCES 4
2497090Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
24970Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
24970 USE AS AL T SOURCE SUPPLYReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
24970 AS ALT SO URCE OF SUPPLYReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 02922?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 02922?
02922 is a GASKET,SPIRAL WOUND.
What parts can replace 02922?
There are 4 known substitutes for 02922: 2497090, 24970, 24970 USE AS AL T SOURCE SUPPLY and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 02922?
02922 is cataloged in the U.S. Government catalog under NSN 5330-01-408-6417. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 02922