PartsTable
Technical Data Sheet
PartsTable / MRO / 02876
02876 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CAPACITOR,FIXED,PAPER DIELECTRIC. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES, body_width: 0.344 INCHES NOMINAL IN, cone_width: 0.8750 INCHES NOMINAL IN, body_height: 0.828 INCHES NOMINAL IN, body_length: 0.828 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-7759, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 02876
NSN: 3110-00-155-7759
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES
body_width0.344 INCHES NOMINAL IN
cone_width0.8750 INCHES NOMINAL IN
body_height0.828 INCHES NOMINAL IN
body_length0.828 INCHES NOMINAL IN
bore_diameter1.2500 INCHES NOMINAL IN
outside_diameter10.500 INCHES NOMINAL IN
special_featuresAXIAL DISTANCE BETWEEN CENTER OF ROLLER CONTACT LINE AND CONE STABILITY POINT ON SHAFT AXIS 0.1500 IN. IN
style_designatorNORMAL ANGLE
aperture_diameter8.500 INCHES NOMINAL IN
bolt_hole_quantity19
NSN3110-00-155-7759
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 02876 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 1.2500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
CONE CORNER RADIUS: 0.0310 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE WIDTH: 0.8750 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER1.2500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SPECIAL FEATURESAXIAL DISTANCE BETWEEN CENTER OF ROLLER CONTACT LINE AND CONE STABILITY POINT ON SHAFT AXIS 0.1500 IN. IN
CONE CORNER RADIUS0.0310 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE WIDTH0.8750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
15652Interchangeable
interchangeable cross-reference
interchangeable
SMB182827Interchangeable
interchangeable cross-reference
interchangeable
808K14Interchangeable
interchangeable cross-reference
interchangeable
0287-6Interchangeable
interchangeable cross-reference
interchangeable
JANC91Interchangeable
interchangeable cross-reference
interchangeable
CN35E203MInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 02876?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 02876?
02876 is a CAPACITOR,FIXED,PAPER DIELECTRIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace 02876?
There are 24 known substitutes for 02876: 15652, SMB182827, 808K14 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 02876?
02876 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-7759. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 02876

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026