PartsTable
Technical Data Sheet
Download PDF

028-561Z — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

028-561Z: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_length: 1.410 INCHES NOMINAL IN, second_leg_style: END RADIUS, second_leg_width: 0.750 INCHES NOMINAL IN, special_features: 1ST END IS HOOKED SHAPED WITH OPENING CUT TO MATE WITH 1.00/1.50 DIA. BALL.

This part is cataloged in the U.S. Government catalog under NSN 5340-01-271-0292, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
028-561Z
NSN: 5340-01-271-0292
FSC: 5340 — Hardware, Commercial
CAGE: 64386 — BUCKHORN RUBBER PRODUCTS INC. (USA)
SPECIFICATIONS
materialSTEEL
first_leg_angle90.0 DEGREES NOMINAL
first_leg_length1.410 INCHES NOMINAL IN
second_leg_styleEND RADIUS
second_leg_width0.750 INCHES NOMINAL IN
special_features1ST END IS HOOKED SHAPED WITH OPENING CUT TO MATE WITH 1.00/1.50 DIA. BALL
style_designatorANGLE
second_leg_length2.160 INCHES NOMINAL IN
surface_treatmentZINC
first_leg_thickness0.470 INCHES NOMINAL IN
second_leg_thickness1.050 INCHES NOMINAL IN
second_leg_end_radius0.500 INCHES NOMINAL IN
NSN5340-01-271-0292
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 028-561Z MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.270 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.219 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 0.750 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 2.160 INCHES NOMINAL IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.380 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ANGLE
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.270 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.219 INCHES NOMINAL IN
SECOND LEG WIDTH0.750 INCHES NOMINAL IN
SECOND LEG LENGTH2.160 INCHES NOMINAL IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.380 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
SECOND LEG THICKNESS1.050 INCHES NOMINAL IN
FIRST LEG THICKNESS0.470 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
12308228Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
028-561Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 028-561Z?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 028-561Z?
028-561Z is a BRACKET,ANGLE.
What parts can replace 028-561Z?
There are 2 known substitutes for 028-561Z: 12308228, 028-561. Substitute compatibility should be verified for your specific system.
What is the NSN for 028-561Z?
028-561Z is cataloged in the U.S. Government catalog under NSN 5340-01-271-0292. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 028-561Z

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.