PartsTable
Technical Data Sheet
Download PDF

028-13058 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

028-13058: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR, special_features: AS568-916 NEOPRENE-1, center_hole_diameter: 1.161 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN, cross-sectional_height: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, end_item_identification: CONDENSER/EVA. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-484-8571, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
028-13058
NSN: 5331-01-484-8571
FSC: 5331 — O-ring
CAGE: 66935 — JOHNSON CONTROLS NAVY SYSTEMS, LLC (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR
special_featuresAS568-916 NEOPRENE-1
center_hole_diameter1.161 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN
cross-sectional_height0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
end_item_identificationCONDENSER/EVA
NSN5331-01-484-8571
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 028-13058 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.161 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
SPECIAL FEATURESAS568-916 NEOPRENE-1
CENTER HOLE DIAMETER1.161 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONCONDENSER/EVA
MATERIALRUBBER CHLOROPRENE CLASS CR
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 2
02813058000Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
376-88562-000 ITEM 2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 028-13058?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 028-13058?
028-13058 is a O-RING.
What parts can replace 028-13058?
There are 2 known substitutes for 028-13058: 02813058000, 376-88562-000 ITEM 2. Substitute compatibility should be verified for your specific system.
What is the NSN for 028-13058?
028-13058 is cataloged in the U.S. Government catalog under NSN 5331-01-484-8571. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 028-13058