PartsTable
Technical Data Sheet

02510 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The COVER,CONDUIT OUTLET is a the manufacturer industrial component. Key specifications include unit_type: CHAIN, mounting_method: BOLT, special_features: STYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200, pipe_size_accommodated: 0.125 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN, supplementary_features: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5330-00-204-5279, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
02510
NSN: 5330-00-204-5279
FSC: 5330
CAGE: 93334 — ATWOOD FENCE CO INC (USA)
SPECIFICATIONS
unit_typeCHAIN
mounting_methodBOLT
special_featuresSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
pipe_size_accommodated0.125 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN
supplementary_featuresCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
NSN5330-00-204-5279
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 02510 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
76-179InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
GGG-V-415 TY1CL1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
A-A-2980InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
GGG-V-415InterchangeableGOVERNMENT REGISTRY
Switch,telephone,crossbar
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 02510?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 02510?
02510 is a COVER,CONDUIT OUTLET.
What parts can replace 02510?
There are 4 known substitutes for 02510: 76-179, GGG-V-415 TY1CL1, A-A-2980 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 02510?
02510 is cataloged in the Federal Logistics Information System under NSN 5330-00-204-5279. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 02510