PartsTable
Technical Data Sheet
Download PDF

025-0501-000 — CAP,PROTECTIVE,DUST AND MOISTURE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

025-0501-000: CAP,PROTECTIVE,DUST AND MOISTURE.

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC, POLYETHYLENE (PP), design_type: FRICTION, overall_diameter: 50.4 MILLIMETERS NOMINAL MM, inside_diameter_length: 14.5 MILLIMETERS NOMINAL MM, round_cap_outside_surface_condition: SMOOTH, opening_inside_diameter_for_which_designed: 45.9 MILLIMETERS NOMINAL MM. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-280-2228, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
025-0501-000
NSN: 5340-00-280-2228
NIINs: 002802228, 011574747
FSC: 5340 — Hardware, Commercial
CAGE: 71468 — ITT CANNON LLC (USA)
SPECIFICATIONS
materialPLASTIC, POLYETHYLENE (PP)
design_typeFRICTION
overall_diameter50.4 MILLIMETERS NOMINAL MM
inside_diameter_length14.5 MILLIMETERS NOMINAL MM
round_cap_outside_surface_conditionSMOOTH
opening_inside_diameter_for_which_designed45.9 MILLIMETERS NOMINAL MM
NSN5340-00-280-2228
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 025-0501-000 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CLOSED END OVERALL DIAMETER: 1.796 INCHES MAXIMUM IN
•
LENGTH UNDER SHOULDER: 0.570 INCHES NOMINAL IN
•
OPEN END INSIDE DIAMETER: 1.730 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
TECHNICAL CHARACTERISTICS
CLOSED END OVERALL DIAMETER1.796 INCHES MAXIMUM IN
LENGTH UNDER SHOULDER0.570 INCHES NOMINAL IN
OPEN END INSIDE DIAMETER1.730 INCHES MAXIMUM IN
MATERIALPLASTIC, POLYETHYLENE (PP)
SUBSTITUTES & CROSS-REFERENCES 8
8799475Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
PAJ0129Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
8783147Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
12-195-2000Reference document
Same NSN cross-reference
Reference document — Informative reference only
632495-501Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
8791369Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 025-0501-000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 025-0501-000?
025-0501-000 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 025-0501-000?
There are 8 known substitutes for 025-0501-000: 8799475, PAJ0129, 8783147 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 025-0501-000?
025-0501-000 is cataloged in the U.S. Government catalog under NSN 5340-00-280-2228. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 025-0501-000