PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 02472
02472 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PIN,GROOVED,HEADED is a the manufacturer industrial component. Key specifications include height: 0.020 INCHES NOMINAL IN, diameter: 0.086 INCHES NOMINAL IN, material: STEEL COMP 303 OVERALL, head_style: FLAT, undercut_width: 0.012 INCHES NOMINAL IN, effective_length: 0.107 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-197-8492, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
02472
NSN: 5330-00-197-8492
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
height0.020 INCHES NOMINAL IN
diameter0.086 INCHES NOMINAL IN
materialSTEEL COMP 303 OVERALL
head_styleFLAT
undercut_width0.012 INCHES NOMINAL IN
effective_length0.107 INCHES NOMINAL IN
style_designatorGROOVE
pin_head_diameter0.125 INCHES NOMINAL IN
surface_treatmentPASSIVATE OVERALL
under_head_length0.156 INCHES NOMINAL IN
undercut_diameter0.054 INCHES NOMINAL IN
material_document_and_classificationQQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-197-8492
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 02472 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
MILP17303CLASS2TYPECInterchangeable
interchangeable cross-reference
interchangeable
02789Interchangeable
interchangeable cross-reference
interchangeable
X74222PC22Interchangeable
interchangeable cross-reference
interchangeable
7215001PC19AInterchangeable
interchangeable cross-reference
interchangeable
B7512M159PC15Interchangeable
Same NIIN cross-reference
interchangeable
A7511M9PC12Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 02472?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 02472?
02472 is a PIN,GROOVED,HEADED.
What parts can replace 02472?
There are 12 known substitutes for 02472: MILP17303CLASS2TYPEC, 02789, X74222PC22 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 02472?
02472 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-197-8492. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 02472

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026