PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 02422
02422 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TRANSDUCER,PRESSURE ALTITUDE is a the manufacturer industrial component. Key specifications include end_item_identification: TARGETS, SURFACE TO AIR MISSILES. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-599-7159, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
02422
NSN: 5330-00-599-7159
FSC: 5330
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
end_item_identificationTARGETS, SURFACE TO AIR MISSILES
NSN5330-00-599-7159
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 02422 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FABRICATION METHOD: SOLID
•
CROSS-SECTIONAL HEIGHT: 0.312 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.250 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1 CLASS
•
ANGLE HEIGHT: 0.156 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
•
CROSS-SECTIONAL SHAPE STYLE: DELTA
TECHNICAL CHARACTERISTICS (FLIS)
FABRICATION METHODSOLID
CROSS-SECTIONAL HEIGHT0.312 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.250 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1 CLASS
ANGLE HEIGHT0.156 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
CROSS-SECTIONAL SHAPE STYLEDELTA
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
B559-266Interchangeable
interchangeable cross-reference
interchangeable
MILR1149Interchangeable
interchangeable cross-reference
interchangeable
TYPE1CLASS1Interchangeable
interchangeable cross-reference
interchangeable
251625PC8Interchangeable
interchangeable cross-reference
interchangeable
702783Interchangeable
interchangeable cross-reference
interchangeable
525-4366504 PART NO.7 AND 15Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 02422?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 02422?
02422 is a TRANSDUCER,PRESSURE ALTITUDE.
What parts can replace 02422?
There are 15 known substitutes for 02422: B559-266, MILR1149, TYPE1CLASS1 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 02422?
02422 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-599-7159. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 02422

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026