PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 02420481400
02420481400 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 CASE, case_style: RECESSED, seal_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, housing_bore_diameter: 2.0615 INCHES MINIMUM AND 2.0635 INCHES MAXIMUM IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.0625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-465-5565, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
02420481400
NSN: 5330-00-465-5565
FSC: 5330
CAGE: 91251 — FREUDENBERG-NOK GENERAL PARTNERSHIP DBA FREDENBERG-NOK SEALS DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 302 CASE
case_styleRECESSED
seal_width0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
housing_bore_diameter2.0615 INCHES MINIMUM AND 2.0635 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.0625 INCHES NOMINAL IN
material_document_and_classification4806-2 FSCM 91251 MFR REF SINGLE MATERIAL RESPONSE SEALING ELEMENT
NSN5330-00-465-5565
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 02420481400 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 2.0615 INCHES MINIMUM AND 2.0635 INCHES MAXIMUM IN
•
SEAL WIDTH: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 302 CASE
•
SEALING ELEMENT STYLE: ANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: 4806-2 FSCM 91251 MFR REF SINGLE MATERIAL RESPONSE SEALING ELEMENT
•
CASE STYLE: RECESSED
•
ACCOMMODATED SHAFT DIAMETER: 1.0625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER2.0615 INCHES MINIMUM AND 2.0635 INCHES MAXIMUM IN
SEAL WIDTH0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
MATERIALSTEEL COMP 302 CASE
SEALING ELEMENT STYLEANGULAR
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIAL DOCUMENT AND CLASSIFICATION4806-2 FSCM 91251 MFR REF SINGLE MATERIAL RESPONSE SEALING ELEMENT
CASE STYLERECESSED
ACCOMMODATED SHAFT DIAMETER1.0625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
31891Interchangeable
interchangeable cross-reference
interchangeable
R4268FInterchangeable
interchangeable cross-reference
interchangeable
XR26345Interchangeable
interchangeable cross-reference
interchangeable
4814Interchangeable
interchangeable cross-reference
interchangeable
1960919-1Interchangeable
interchangeable cross-reference
interchangeable
AL05179-503Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 02420481400?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 02420481400?
02420481400 is a SEAL,PLAIN ENCASED.
What parts can replace 02420481400?
There are 16 known substitutes for 02420481400: 31891, R4268F, XR26345 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 02420481400?
02420481400 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-465-5565. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 02420481400

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026