PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 023799
023799 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.375 INCHES NOMINAL IN, overall_length: 0.594 INCHES NOMINAL IN, style_designator: HALF ARCH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-626-6356, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
023799
NSN: 5340-00-626-6356
FSC: 5340
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.375 INCHES NOMINAL IN
overall_length0.594 INCHES NOMINAL IN
style_designatorHALF ARCH
surface_treatmentCADMIUM
material_thickness0.032 INCHES NOMINAL IN
mounting_hole_size0.203 INCHES NOMINAL IN
inside_diameter/arch_length0.031 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch0.500 INCHES NOMINAL IN
distance_between_mounting_hole_center_and_inside_edge_of_arch0.250 INCHES NOMINAL IN
NSN5340-00-626-6356
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 023799 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE BETWEEN MOUNTING HOLE CENTER AND INSIDE EDGE OF ARCH: 0.250 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM
•
STYLE DESIGNATOR: HALF ARCH
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
•
DISTANCE BETWEEN BASE AND INSIDE OF ARCH: 0.500 INCHES NOMINAL IN
•
MOUNTING PAD: NOT INCLUDED
•
CUSHION: NOT INCLUDED
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE BETWEEN MOUNTING HOLE CENTER AND INSIDE EDGE OF ARCH0.250 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM
STYLE DESIGNATORHALF ARCH
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.500 INCHES NOMINAL IN
MOUNTING PADNOT INCLUDED
OVERALL WIDTH0.375 INCHES NOMINAL IN
CUSHIONNOT INCLUDED
OVERALL LENGTH0.594 INCHES NOMINAL IN
INSIDE DIAMETER/ARCH LENGTH0.031 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
69469Interchangeable
interchangeable cross-reference
interchangeable
240343Interchangeable
interchangeable cross-reference
interchangeable
L31537Interchangeable
interchangeable cross-reference
interchangeable
INB80Y6Interchangeable
interchangeable cross-reference
interchangeable
M1393Interchangeable
interchangeable cross-reference
interchangeable
860799Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 023799?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 023799?
023799 is a STRAP,RETAINING.
What parts can replace 023799?
There are 16 known substitutes for 023799: 69469, 240343, L31537 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 023799?
023799 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-626-6356. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 023799

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026