PartsTable
Technical Data Sheet
Download PDF

0236-RR3-001 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

0236-RR3-001: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 1.00 INCHES NOMINAL IN, first_leg_length: 1.50 INCHES NOMINAL IN, second_leg_style: SQUARE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-621-3570, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0236-RR3-001
NSN: 5340-01-621-3570
FSC: 5340 — Hardware, Commercial
CAGE: 36MV0 — THE SHYFT GROUP USA, INC DBA THE SHYFT GROUP USA, INC (USA)
SPECIFICATIONS
materialSTEEL
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width1.00 INCHES NOMINAL IN
first_leg_length1.50 INCHES NOMINAL IN
second_leg_styleSQUARE
second_leg_width1.00 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length5.50 INCHES NOMINAL IN
first_leg_thickness0.19 INCHES NOMINAL IN
second_leg_thickness0.19 INCHES NOMINAL IN
end_item_identification2355015590791
NSN5340-01-621-3570
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0236-RR3-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.50 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.63 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.41 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.53 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 1.00 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 5.50 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.50 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.63 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.41 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.53 INCHES NOMINAL IN
SECOND LEG WIDTH1.00 INCHES NOMINAL IN
SECOND LEG LENGTH5.50 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.50 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
0236-RR3Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 0236-RR3-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0236-RR3-001?
0236-RR3-001 is a BRACKET,ANGLE.
What parts can replace 0236-RR3-001?
There is 1 known substitute for 0236-RR3-001: 0236-RR3. Substitute compatibility should be verified for your specific system.
What is the NSN for 0236-RR3-001?
0236-RR3-001 is cataloged in the U.S. Government catalog under NSN 5340-01-621-3570. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0236-RR3-001