PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 02261-0280-03
02261-0280-03 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.094 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, aperture_width: 8.062 INCHES NOMINAL IN, aperture_length: 14.928 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-232-7986, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
02261-0280-03
NSN: 5330-00-232-7986
FSC: 5330
CAGE: 93568 — HARSCO CORP BMY-COMBAT SYSTEMS DIV (USA)
SPECIFICATIONS
hole_diameter0.094 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
aperture_width8.062 INCHES NOMINAL IN
aperture_length14.928 INCHES NOMINAL IN
NSN5330-00-232-7986
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 02261-0280-03 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE LENGTH: 14.928 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.094 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
APERTURE WIDTH: 8.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE LENGTH14.928 INCHES NOMINAL IN
HOLE DIAMETER0.094 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
APERTURE WIDTH8.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
68B618000-205Interchangeable
interchangeable cross-reference
interchangeable
4500-205Interchangeable
interchangeable cross-reference
interchangeable
4034-1Interchangeable
interchangeable cross-reference
interchangeable
3969-2Interchangeable
interchangeable cross-reference
interchangeable
BP-1250-LInterchangeable
interchangeable cross-reference
interchangeable
613901-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 02261-0280-03?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 02261-0280-03?
02261-0280-03 is a GASKET.
What parts can replace 02261-0280-03?
There are 12 known substitutes for 02261-0280-03: 68B618000-205, 4500-205, 4034-1 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 02261-0280-03?
02261-0280-03 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-232-7986. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 02261-0280-03

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026