02213-1 — DRILL,WIRE PASS,BONE

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

02213-1: DRILL,WIRE PASS,BONE.

The DRILL,WIRE PASS,BONE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, thickness: 0.036 INCHES NOMINAL IN, body_length: 0.250 INCHES NOMINAL IN, body_diameter: 0.090 INCHES NOMINAL IN, hole_diameter: 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN, terminal_type: WIRE LEAD. This part is cataloged in the U.S.

Government catalog under NSN 5905-01-176-3866, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 02213-1

NSN: 5905-01-176-3866
NIINs: 011763866, 012002093, 013189893
FSC: 5905 — Resistor
CAGE: 57705 — HUNTRON INC (USA)

SPECIFICATIONS

material	STEEL CORROSION RESISTING OVERALL
thickness	0.036 INCHES NOMINAL IN
body_length	0.250 INCHES NOMINAL IN
body_diameter	0.090 INCHES NOMINAL IN
hole_diameter	0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
terminal_type	WIRE LEAD
inclosure_type	ENCAPSULATED
overall_length	66.70 MILLIMETERS NOMINAL MM
terminal_length	1.500 INCHES NOMINAL IN
overall_diameter	0.800 INCHES NOMINAL IN
special_features	WIRE PASS DRILL BIT; HEAD LENGTH 6.40 MM MM
style_designator	AXIAL TERMINAL EACH END
NSN	5905-01-176-3866

COMPONENT DIAGRAM

KEY FEATURES

•

RESISTANCE TOLERANCE IN PERCENT: -2.000 TO 2.000

•

TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS: -100.0 TO 100.0

•

BODY DIAMETER: 0.090 INCHES NOMINAL IN

•

ELECTRICAL RESISTANCE: 2.200 MEGOHMS

•

INCLOSURE TYPE: ENCAPSULATED

•

TERMINAL TYPE: WIRE LEAD

•

TERMINAL LENGTH: 1.500 INCHES NOMINAL IN

•

TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS: -55.0 TO 150.0

TECHNICAL CHARACTERISTICS

RESISTANCE TOLERANCE IN PERCENT	-2.000 TO 2.000
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS	-100.0 TO 100.0
BODY DIAMETER	0.090 INCHES NOMINAL IN
ELECTRICAL RESISTANCE	2.200 MEGOHMS
INCLOSURE TYPE	ENCAPSULATED
TERMINAL TYPE	WIRE LEAD
TERMINAL LENGTH	1.500 INCHES NOMINAL IN
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS	-55.0 TO 150.0
STYLE DESIGNATOR	AXIAL TERMINAL EACH END
RELIABILITY FAILURE RATE LEVEL IN PERCENT	0.001

SUBSTITUTES & CROSS-REFERENCES 10

2322-101-32225Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

R10225Reference document

Same NSN cross-reference

Reference document — Secondary reference

1820467-001Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

ERD-25TJ225Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

RLR07C2204GRReference document

Same NSN cross-reference

Reference document — Secondary reference

RLR07C2204GPReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy 02213-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 02213-1?

02213-1 is a DRILL,WIRE PASS,BONE. It is classified as a MRO (MRO_GENERAL).

What parts can replace 02213-1?

There are 10 known substitutes for 02213-1: 2322-101-32225, R10225, 1820467-001 and 7 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 02213-1?

02213-1 is cataloged in the U.S. Government catalog under NSN 5905-01-176-3866. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

02213-1 — DRILL,WIRE PASS,BONE

Request a Quote — 02213-1