0216
✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: PAPER OVERALL, body_length: 2.000 INCHES NOMINAL IN, body_diameter: 0.563 INCHES NOMINAL IN, hole_diameter: 0.180 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, terminal_type: TAB, SOLDER LUG, inclosure_type: ENCAPSULATED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-166-5700, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MRO →
MRO_GENERAL →
0216
NSN: 5330-00-166-5700 FSC: 5330 CAGE: 78943 — TRIUMPH THERMAL SYSTEMS, LLC (USA)
SPECIFICATIONS
material PAPER OVERALL body_length 2.000 INCHES NOMINAL IN body_diameter 0.563 INCHES NOMINAL IN hole_diameter 0.180 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN terminal_type TAB, SOLDER LUG inclosure_type ENCAPSULATED terminal_width 0.250 INCHES NOMINAL IN terminal_length 0.563 INCHES NOMINAL IN outside_diameter 3.750 INCHES NOMINAL IN style_designator RADIAL TERMINAL EACH END aperture_diameter 2.625 INCHES NOMINAL IN bolt_hole_quantity 8 NSN 5330-00-166-5700
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 0216
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• STYLE DESIGNATOR: CIRCULAR
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
• BOLT CIRCLE DIAMETER: 3.375 INCHES NOMINAL IN
• OUTSIDE DIAMETER: 3.750 INCHES NOMINAL IN
• HOLE DIAMETER: 0.180 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
• APERTURE DIAMETER: 2.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATOR CIRCULAR CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION CROSS-SECTIONAL THICKNESS 0.031 INCHES NOMINAL IN MATERIAL PAPER OVERALL BOLT CIRCLE DIAMETER 3.375 INCHES NOMINAL IN OUTSIDE DIAMETER 3.750 INCHES NOMINAL IN HOLE DIAMETER 0.180 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN APERTURE DIAMETER 2.625 INCHES NOMINAL IN BOLT HOLE QUANTITY 8
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
56-12 Interchangeable interchangeable cross-reference
interchangeable
301576-1 Interchangeable interchangeable cross-reference
interchangeable
714181 Interchangeable interchangeable cross-reference
interchangeable
0216 Interchangeable interchangeable cross-reference
interchangeable
RW32V123 Interchangeable interchangeable cross-reference
interchangeable
MILR26 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 0216?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0216?
0216 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 0216?
There are 17 known substitutes for 0216: 56-12, 301576-1, 714181 and 14 more. Substitute compatibility should be verified for your specific system.
Is 0216 still available?
0216 is currently cancelled.