PartsTable
Technical Data Sheet
02104 ✓ Verified by PartsTable
Displex · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Real Glass (2D) with EASY-ON® Eco Mounting Frame<br> <br>Tempered glass with rounded edges<br>All Displex protective glasses have a surface hardness of 10H and are therefore not only more scratch-, break- and shock-resistant than comparable brand products, but even surpass sapphire glass, which is used in luxury watches and has a hardness of 9H.<br>Even the edges, the area of the smartphone and protective glass most susceptible to breakage and impact, are specially hardened, rounded by 4-fold polishing and finished with a shock-absorbing edge. This elaborate production process further increases the protection against knocks and bumps and allows a particularly pleasant use of the smartphone. With these features, the protective glass is extremely resistant and guarantees maximum breakage resistance.<br> <br>Case-friendly<br>Our Displex protective glass is manufactured to within 5/100 mm of the smartphone contours and therefore fits perfectly on your smartphone.

In addition, the protectiv This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-230-0028, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
02104
NSN: 5340-00-230-0028
FSC: 5340
CAGE: 77640 — ZF ACTIVE SAFETY AND ELECTRONICS US LLC DIV TRW COMMERCIAL STEERING SYSTEMS (USA)
SPECIFICATIONS
general_characteristics_item_descriptionBRASS; 1.560 IN. LG; 1.238 IN. THD LG; 0.312 IN. ID IN
NSN5340-00-230-0028
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 02104 MFR: Displex ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
STYLE DESIGNATOR: SEAT
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSEAT
MATERIALSTEEL
OVERALL HEIGHT0.1880 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
20-280-2Interchangeable
interchangeable cross-reference
interchangeable
02104Interchangeable
interchangeable cross-reference
interchangeable
H-6181 PIECE 8Interchangeable
interchangeable cross-reference
interchangeable
H-6181Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 02104?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 02104?
02104 is a ADJUSTING BOLT manufactured by Displex.
What parts can replace 02104?
There are 4 known substitutes for 02104: 20-280-2, 02104, H-6181 PIECE 8 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 02104?
02104 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-230-0028. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 02104