PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 02063
02063 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The DISPLAY,OPTOELECTRONIC is a the manufacturer industrial component. Key specifications include thickness: 0.909 INCHES MINIMUM MEMBER IN, design_type: DEAD BOLT, display_type: LIGHT EMITTING DIODE (L.E.D.)., overall_width: 0.400 INCHES NOMINAL IN, character_type: NUMERIC, current_rating: 320.0 AMPERES MAXIMUM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-442-0623, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
02063
NSN: 5340-00-442-0623
FSC: 5340
CAGE: 14608 — EMHART INDUSTRIES INC CORBIN CABINET LOCK HARDWARE DIV (USA)
SPECIFICATIONS
thickness0.909 INCHES MINIMUM MEMBER IN
design_typeDEAD BOLT
display_typeLIGHT EMITTING DIODE (L.E.D.).
overall_width0.400 INCHES NOMINAL IN
character_typeNUMERIC
current_rating320.0 AMPERES MAXIMUM
overall_length1.800 INCHES NOMINAL IN
operation_methodKEY DEAD BOLT
special_featuresMASTER KEY PROVISION:INCLUDED;
features_providedMASTER KEY PROVISIONS
terminal_type_and_quantity16 PIN
character_quantity_per_line4 LOCATION NOT OTHERWISE SPECIFIED
NSN5340-00-442-0623
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 02063 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPERATION METHOD: KEY DEAD BOLT
•
FEATURES PROVIDED: MASTER KEY PROVISIONS
•
DESIGN TYPE: DEAD BOLT
•
THICKNESS: 0.909 INCHES MINIMUM MEMBER IN
TECHNICAL CHARACTERISTICS (FLIS)
OPERATION METHODKEY DEAD BOLT
FEATURES PROVIDEDMASTER KEY PROVISIONS
DESIGN TYPEDEAD BOLT
SPECIAL FEATURESMASTER KEY PROVISION:INCLUDED;
THICKNESS0.909 INCHES MINIMUM MEMBER IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
87-0786Interchangeable
interchangeable cross-reference
interchangeable
1968Interchangeable
interchangeable cross-reference
interchangeable
257342Interchangeable
interchangeable cross-reference
interchangeable
AU5025Interchangeable
interchangeable cross-reference
interchangeable
999108078Interchangeable
interchangeable cross-reference
interchangeable
19-78Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 02063?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 02063?
02063 is a DISPLAY,OPTOELECTRONIC.
What parts can replace 02063?
There are 16 known substitutes for 02063: 87-0786, 1968, 257342 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 02063?
02063 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-442-0623. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 02063

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026