PartsTable
Technical Data Sheet
Download PDF

0202680 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

0202680: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 1.4375 INCHES NOMINAL IN, bore_diameter: 2.0000 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, cone_corner_radius: 0.1406 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA CLASS 2. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-3636, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0202680
NSN: 3110-00-100-3636
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: H0001 — DAF TRUCKS N.V. (NLD)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.4375 INCHES NOMINAL IN
bore_diameter2.0000 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
cone_corner_radius0.1406 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-3636
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 0202680 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
CONE WIDTH: 1.4375 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 2.0000 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
CONE WIDTH1.4375 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER2.0000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 7
0511054Reference document
Same NSN cross-reference
Reference document — Secondary reference
043810Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
59200Reference document
Same NSN cross-reference
Reference document — Secondary reference
305678Reference document
Same NSN cross-reference
Reference document — Secondary reference
2X6551AReference document
Same NSN cross-reference
Reference document — Secondary reference
2L1006Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 0202680?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0202680?
0202680 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 0202680?
There are 7 known substitutes for 0202680: 0511054, 043810, 59200 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0202680?
0202680 is cataloged in the U.S. Government catalog under NSN 3110-00-100-3636. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0202680