PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 020196
020196 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,ASSEMBLED WASHER is a the manufacturer industrial component. Key specifications include diameter: 2.984 INCHES MINIMUM AND 3.016 INCHES MAXIMUM IN, material: ALUMINUM ALLOY, thickness: 0.050 INCHES NOMINAL IN, material_document_and_classification: QQ-A-250/1, 0 FED SPEC SINGLE MATERIAL RESPONSE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-419-5876, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
020196
NSN: 5306-00-419-5876
FSC: 5306
CAGE: 73740 — TRW INC TRW COMMERCIAL STEERING DIV (USA)
SPECIFICATIONS
diameter2.984 INCHES MINIMUM AND 3.016 INCHES MAXIMUM IN
materialALUMINUM ALLOY
thickness0.050 INCHES NOMINAL IN
material_document_and_classificationQQ-A-250/1, 0 FED SPEC SINGLE MATERIAL RESPONSE
NSN5306-00-419-5876
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 020196 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD HEIGHT: 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
PRIMARY WASHER MATERIAL THICKNESS: 0.062 INCHES MINIMUM IN
•
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD HEIGHT0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
PRIMARY WASHER MATERIAL THICKNESS0.062 INCHES MINIMUM IN
WIDTH BETWEEN FLATS0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
FASTENER LENGTH0.595 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
PRIMARY WASHER OUTSIDE DIAMETER0.493 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
02019-6Upgraded Successor
successor cross-reference
successor
1290516Interchangeable
interchangeable cross-reference
interchangeable
C1498DInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 020196?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 020196?
020196 is a BOLT,ASSEMBLED WASHER.
What parts can replace 020196?
There are 3 known substitutes for 020196: 02019-6, 1290516, C1498D. Substitute compatibility should be verified for your specific system.
What is the NSN for 020196?
020196 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-419-5876. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 020196

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026